Aluminium tripod, black anodised pushed out length 10,50 Meter

Product information "Aluminium tripod, black anodised pushed out length 10,50 Meter"

This aluminium high tripod is manufactured by a family owned factory in Germany.

With an extended length of 10.50 meter and a load capacity of up to 8 kilos, the aluminium high tripod is perfect for WiFi Site Surveys in logistic warehouses, various types of factories and distribution centres.

Due ot the inserted length of 1.90 meter and a transport weight of approx. 28 kilos, this aluminium high tripod is very easy to transport. 

The aluminium high stand consists of an aluminium round mast to which four feet are attached. The individual feet are telescopic so that small unevennesses in the terrain can be compensated. The round masts consist of several aluminium tubes that are inserted into each other and polished on one side and pushed out by hand. The sturdy clamps securely lock the extended tubes in place.   

The maximum permissble extension lenght is limited by a marking ring. There is no fixed stop when pulling out. There are two markings for safety. When the first mark is reached, the telescopic tube should then be slowly pushed out to the second mark and locked in place by the clamp when this is reached. 

The aluminium high tripod and the round mast are made of anodised aluminium round tubes (AlMgSi05 F22) with a 2 mm wall thickness. The own weight is approx. 28 kilos and is therefore very low. 

** Note: When using the aluminium high tripod with a head load, bracing must be carried out depending on the existing wind conditions.**

 

  • Aluminium high tripod, black anodised 10.50 metres extended height
  • Inserted length: 1.90 metres
  • Extended length: 10.50 metres
  • Colour: black anodised
  • Tube diameter (mm): 70/65/60/55/50/45/40
  • Material: Aluminium
  • Load capacity: up to 8 Kilo
  • Transport weight: approx. 28 Kilo 
  • Head: 1/4" photo thread (removable)
  • Country of origin: Germany

Similar products

Tip
The Accelerator Compact PoE + Battery Pack V2
Specifically designed for use at site surveys, it´s small, compact design and battery capacity allow for many hours of continuous use. It is the ultimate site survey tool and a must have for all Wi-Fi engineers! Great for performing wireless site surveys, portable IP camera set up´s, temporary wireless bridge connections, and charging mobile phones and tablets. Multiple PoE outputs Lightweight and portable Charge while in use LCD display toggles between battery percentage and voltage Operating voltage: 110-220V Battery input (2.1mm): 12.6V DC, 2A Battery output (2.1mm): 12V, 2A PoE Output: IEEE 802.af, 802.3at & 802.3bt (Type 3 & 4) complaint USB 2.0 Output: 5V DC, 2A USB C Output: Up to 20V, 5A Battery Type & Capacity: Lithium-Ionnen 7500 mAh 12.6V/94.5 Wh Dimensions 5.5" H x 3.9" W x 1.875" D (140 mm x 100 mm x 48 mm) Operating temperature: 14-140F (-10 to 60 C) Colour: Black Included in delivery: 1x Accelerator Battery Pack Version 2 1x one portable carrying bag 1x one wall charger 1x 2.1 mm plug-plug connection for the 12V output Available downloads: download datasheet

€717.57*
NetAlly AirCheck G3 Pro WiFi 6 Wireless Analyzer
Rugged instrument for comprehensive network validation and troubleshootingNative WiFi 6, 2,4/5/6 GHz band and Bluetooth / BLE supportQuickly test, verify, troubleshoot and map WiFi networksFaster and easier WiFi and Bluetooth / BLE site surveys with AirMapper Site Survey appQuickly find the physical location of WiFi access points and clients on the 2,4 GHz, 5 GHz and 6 GHz bandsOverviewThe AirCheck G3 Wireless Analyzer´s intuitive user interface provides actionable intelligence, speeding and simplifying wireless deployment, troubleshooting and validation. AirCheck G3 is the most cost effective hardware enabled site survey solution for WiFi 6/6E networks. It provides network professionals of any skill level with complete and accurate information to survey and validate WiFi deployments and changes, resolve connectivity and performance problems quickly, speed up closure of trouble tickets, and ensure your WiFi network meets end users´needs. With powerful tools suited for wireless engineers, but ease of use for technicans and remote "smart hands" AirCheck G3 Pro makes your entire team more productive.Key featuresTest, verify and troubleshoot technology upgrades, WiFi 6/6E networks and Bluetooth / BLE devices with advanced testing apps and purpose built hardwareValidate WiFi 6/6E network performance for critical services and key end devicesSupports full 2,4 GHz and 5 GHz spectrum analysis with the optional NXT-1000 portable spectrum analyzer adapterEnables remote engineers to troubleshoot and collaborate with on-site technicans with cloud remote control in Link LiveSeamlessly consolidate and manage field test data and integrate with network management systems via Link LiveFlexible Platform Addresses Multiple TechnologiesNative 2x2 WiFi 6/6E radio that supports:- 802.11 a/b/g/n/ac/ax WiFi network connectivity- Analysis of SSIDs, BSSIDs, channel, client devices and interference soures1x1 WiFi 5 radio that supports:- remote control connection and testing- Network discovery and topology mappingBulit-in Bluetooth v5 / BLE radio for peripheral connectivity and conducting Bluetooth / BLE site surveysUSB interfaces provide connectivity for accessories and other devicesNative WiFi 6 and 6 GHz supportWith the introduction of WiFi 6/6E how WiFi validation and troubleshooting is done has changed. New technologies designed to improve traffic management efficiency and support for the 6 GHZ band were introduced, allowing for higher throughput and better performance in environments where a high user capacity is required - necessitating new technology to test and validate these networks.Validate actual WiFi 6/6E network performance by using native 802.11ax radio Gain visibility into all WiFi devices working on the 2,4 GHz, 5 GHz and 6 GHZ bands*Enables packet captures of WiFi 6 control, management and data frames in all three bandsDiagnose new WiFi 6E mechanismus of Reduced Neighbor Reports, Preferred Scanning channels and multi BSSIDsAuthenticate using the latest security standard of WPA3 and Enhanced Open*NOTE: WiFi 6/6E regulatory compliance implementation of the 6 GHz spectrum varies by country. AirCheck G3 models are available in three versions; see Models and Accessories for additional information.AirMapper Site Survey - Now supporting WiFi 6/6EWith the AirMapper app, AirCheck G3 users can quickly and easily gather location based WiFi and Bluetooth / BLE measurements and create visual heat maps of key performance metrics in the Link Live collaboration, reporting and analysis platform. Simple to use, the AirMapper app is ideal for quick site surveys of new deployments, change validation and performance verification.Faster and easier WiFi and Bluetooth / BLE site surveys with a rugged handheld analyzerAutomatically identify common WiFi network problems using InSites intelligence analysis in Link LiveCollaborate - easily visualize and share survey data through Link LiveSimultaneous passive and active WiFi surveys to gather critical site metrics and validate client experience and roaming with one surveyExport WiFi survey data to AirMagnet Survey Pro for more advanced analysis, planning and reportingSurvey project management capabilities in Link Live provide a major boost in productivity and collaboration for distributed teams conducting surveys at remote sites. A team lead can create a project in Link Live, upload and calibrate the floor plan, then automatically push the configured project out to the desired remote analyzers.Spectrum Analysis and InterferenceTrying to pinpoint the source of WiFi interference on a wireless network is hit or miss with the wrong tools. Through the use of the optional NXT-1000 Mobile Spectrum Analyzer, AirCheck G3 offers a view of RF interference in the 2,4 GHz and 5 GHz bands and its impact on the wireless network´s overall performance. Key graphs and charts include:Real-Time Spectrum: provides a live RF view including current, average and max readingsFrequency Spectrum: Display heat mapped signal density to identify recurring energySpectogram: Shows energy over time to identify the periodic nature of the RF environmentVerify complex wireless networksTest automation speeds and simplifies validation and troubleshooting - so more people can solve more problems, faster.Out-of-the-box AutoTest profiles for WiFi networks that can be customized for your deploymentExecute multiple AutoTest profiles that shorten test time to verify multiple WiFi SSIDsDefine and assign groups of targets to AutoTest profiles to verify performance using Ping, TCP Connect, Web or FTPWired + WiFi network discovery, mapping, analysis and security auditsInstantly see what is on the network and where it is connected. Quickly investigate and locate "suspect" devices and identify problems associated with device misconfigurations.Discovers network devices across multiple VLANs and WiFi SSIDsDiscovery difference analysis in Link Live exposes possible security risks in the network infrastructure by showing changes in connected devicesPowerful filter and sort function with automatic problem detection identifies issues such as:- Duplicate IPs, congested switch ports and oversubscribed WiFi channels / SSIDs- Security issues, such as unknown switches, access points with open authenticationPath analysis shows the switch/router path to any connected deviceBatch authorization workflow makes it easy to identify known vs. unknown devices, enabling "who´s on my network" auditing.WiFi performance test and packet captureVerify WiFi performance and easily capture packets for detailed application analysis.Simultaneously generate and measure IP based traffic through the use of two WiFi radiosSupports popular iPerf network throughput testing for WiFi networksCapture wireless traffic to PCAP files for escalation evidence or analysis, with simple but powerful - filtering  and slicing controls.Simplified collaboration, automated reportingCollaborate with staff across your organization with centralized visibility of distributed tests, speeding resolution of remote site issues.Link Live collaboration, reporting and analysis platform (cloud based or private / on premise) stores test result and site data upload for automated reporting and documentationSimplifies report generation for network deployment documentationAttach screenshots and user comments to each result, adding context for future changes and troubleshootingAvailable API enables seamless data integration between Link Live and trouble ticket or network management systemsModels & AccessoriesImportant notes: WiFi 6/6E regulatory compliance implementation of the 6 GHz spectrum varies by country.AirCheck G3 models are available in three versions: Full Tri-Band (capability across the entire 6 GHz band), Partial Tri-Band (capability for only certain channels in the 6 GHz band as determined by 802.11d regulatory domain information), and Dual Band only (for countries where operation in the 6 GHz band is not allowed). Be sure to select the model that is certified for use in your specific country. Please contact us for more information.The models shown on the table below are for the "Full Tri-Band" version. Replace "AIRCHECK-G3-PRo" with the following for the other model types:AIRCHECK-G3E-PRO     Partial Tri-BandAIRCHECK-G3C-PRO     Dual Band Only (2,4 / 5 GHz)Inclusion of AllyCare SupportAll new AIRCHECK-G3-PRo mainframes are sold with the first year (1 year) of AllyCare support included. Additional year(s) of support may be added. Product registration and activation is required within 30 days of first power on. Model Number / Name Description AIRCHECK-G3-PRO Includes: AIRCHECK-G3-PRO mainframe with 1 year of AllyCare support (AIRCHECK-G3-PRO-1YS, shoulder sling bag, AC charger, Quick Start Guide. AIRCHECK-G3-PRO-KT Includes: AIRCHECK-G3-PRO mainframe with 1 year of AllyCare support (AIRCHECK-G3-PRO-1YS), shoulder sling bag, AC charger, Quick Start Guide, external directional antenna, holster and NXT-1000 spectrum analyzer. AIRCHECK-G3-PRO-TKT Includes: AIRCHECK-G3-PRO mainframe with 1 year of AllyCare support (AIRCHECK-G3-PRO-1YS), shoulder sling bag, AC charger, Quick Start Guide, external directional antenna, holster, NXT-1000 spectrum analyzer and Test Accessory. EXT-ANT-TRIBAND 2,4 / 5 / 6 GHz directional antenna for use with AirCheck G3 and EtherScope nXG NXT-1000 NXT-1000 portable spectrum analyzer G3-PWRADAPTER AC charger replacement / spare for AIRCHECK-G3-PRO mainframe with country power cords G3-REPL-BA Lithium ION replacement battery for use with the AirCheck G3 Holster-G3 Field use carrying holster makes troubleshooting on the go easier. Openings allow access to all applicable buttons and interfaces. AllyCare Support - One year of support is included. Use these support model numbers for extending support at time of purchase or for support renewal. AIRCHECK-G3-PRO-1YS 1 year AllyCare support for all AIRCHECK G3 Pro models, including "E" (Partial Tri-Band) and "C" (Dual Band only) SKU´S: AIRCHECK-G3-PRO, AIRCHECK-G3-PRO-KT, AIRCHECK-G3-PRO-TKT AIRCHECK-G3-PRO-3YS 3 years of AllyCare support for all AIRCHECK G3 PRO models, including "E" (Partial Tri-Band) and "C" (Dual Band only) SKU´S: AIRCHECK-G3-PRO, AIRCHECK-G3-PRO-KT, AIRCHECK-G3-PRO-TKT General Dimensions in mm 102 mm x 196 mm x 42 mm Weight 0,48 kg Battery Rechargeable lithium-ion battery pack (3.63 V, 9,75 A, 35,39 Wh) Battery Life Typical operating life is 10 hours (Battery life from full charge varies depending on the feature being used); Typical charge time is 3 - 4 hours Display 5.0 inch colour LCD with capacitive touchscreen (720 x 1280 pixels) Host interface 2 USB Type-A PortsUSB Type-C Power and On-the-Go PortRP-SMA External Antenna Port Charging USB Type-C 45-W adapter: AC input Power 100-240 V, 50-60 Hz; DC Output Power 15V (3A) Wireless AirCheck G3 has two internal WiFi radios: Testing: 2x2 Tri-band 802.11ax wireless radion (IEEE 802.11 a/b/g/n/ac/ax compliant)Management: 1x1 Dual-band 802.11ac Wave2 + Bluetooth 5.0 and BLE wireless radio (IEEE 802.11 a/b/g/n/ac compliant Specification Compliance IEEE 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac, 802.11ax WiFi Connectivity 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac, 802.11ax Operating frequencies NOTE: These are the center frequencies of the channels that the AirCheck G3 tester supports. Frequencies of channels received and transmitted:2,4 GHz band: 2.412 to 2.484 GHz (channel 1 to channel 14)*5 GHz band: 5.170 to 5.320 GHz, 5.500 to 5.700 GHz, 5.745 to 5.825 GHz (channel 36 to channel 165)*6 GHz: 5.925 to 7.125 GHz (channel 1 to channel 233)*(*) Where allowed by country regulations.NOTE: The tester transmits only on the frequencies allowed in the country where it is operating. Antennas Internal WiFi Antennas Minimum gain 2.0 dBi peak in the 2.4 GHz band, 1.5 dBi peak in the 5 GHz band and 2.7 dBi peak in the 6 GHz band. External Directional Antenna Antenna frequency range 2,4 GHz to 2,5 GHz, 4,9 GHz to 5,9 GHz and 6.0 to 7,1 GhZ.Minimum gain 6,4 dBi peak in the 2,4 GHz band, 8.9 dBi peak in the 5 GHz band and 8.6 dBi peak in the 6 GHz band. download datasheet

€4,426.10*