Tip
Wall Mount for Cisco / Mist access points
made of tin with closeable lid

€89.95*
Tip
The Accelerator Compact PoE + Battery Pack V2
Perfect for AP-on-Stick Surveys

€680.68*
Tip
netool.io PRO Network engineering tool
Smart and hand held network tester for monitoring and troubleshooting in active networks

€355.81*

Topseller

NetAlly AirMagnet Survey PRO Wireless Site Survey Software (includes Planner Modules)
Overview AirMagnet Survey PRO enables network professionals to design, deploy and validate WiFi 6 wireless LAN networks for optimal performance, security and compliance. It also calculates the ideal quantity, placement and configuration of access points for a successful wireless LAN deployment. AirMagnet Survey PRO goes beyond simply verifying RF coverage by plotting actual end-user network performance in terms of connection speed, throughput and packet statistics by allowing you to use any WiFi adapter or AirMapper Site Survey on the AirCheck G2 and EtherScope nXG. AirMagnet Survey PRO helps you get WiFi installations right the first time, preventing costly rework and user complaints. Plan and design WiFi networks without physically rolling out any access points Collect real world data by performing true end-user experience measurements using any WiFi adapter or AirMapper Site Survey on the AirCheck G2 and EtherScope nXG Generate heatmaps that provide full visibility of WiFi coverage, noise SNR, interference, throughput, data rates, retries, loss, Voice-Over-WiFi MOS and more Save time by performing active, passive and spectrum survey in a single walk-through Key Features WiFi 6 Site Survey AirMagnet Surve PRO is a wireless network deployment solution that enables users to measure and assess the true end-user experience of a wireless network using any 802.11 adapter or AirMapper Site Survey on the AirCheck G2 and EtherScope nXG. AirMagnet Survey PRO goes beyong just verifying RF coverage and plots actual end-suer network performance, in terms of throughput and PHY data rates, while taking MU-MIMO and other environmental situations/network configurations into account. The wireless site survey solution reveals the coverage of specific 802.11 parameters that impact perfromance, such as higher MCS schemes and wider channel and intrusion of interference or legacy devices. Results are displayed as a complete WiFi "weather map" of all critical RF and end-user performance metrics. The accountability of "real world" measurements allow IT staff to design and deploy WiFi accurately from start. Helping businesses save time and money, reducing end-user network complaints and recuding costly redesigns of the network. Integration with AirMagnet Planner AirMagnet Planner is built into AirMagnet Survey PRO, providing a single, seamless application as one of the industry´s most complete approaches to wireless LAN design, deployment and ongoing optimization for WiFi 6 networks. With this integrated solution, AirMagnet Planner can be used to accurately design WLANs by modeling building construction materials/obstructions, 802.11 access points and visualizing coverage across multiple floors, then validating the results with real-world data in AirMagnet Survey PRO. Using active end-user performance metrics, users can further perfect their planning models over time. Users also gain additional planning capabilities with the ability to test network plans against the AirWise engine for design requirements. AirMagnet Planner also integrates with AirMagnet Survey Express. "Realworld" Survey Data Collection and Solution of "What-If" Scenarios With the AirMapper app on the AirCheck G2 or EtherScope nXG users can quickly and easily gather location-based WiFi measurements and create visual heat maps of key performance metrics in AirMagnet Survey PRO. Simple to use, the AirMapper app is ideal for quick site surveys of new deployments, change validation and performance verfification. Complete faster and easier WiFi site surveys with an entirely mobile platform Perform enterprise-grade surveys without the need of a dongle or tethered device Collaborate - easily visualize and share survey data through Link-Live cloud service or AirMagnet Survey PRO AirMagnet Survey´s simultaneous wireless site surveying capability leverages multiple adapters plugged into the same PC to provide users with a solution that emulates real-world client behavior (using active and iPerf surveys). Having an accurate wireless emulator tool reduces site surveying time and efforts, cuts cost by half and requires users to walk the floor only once to collect all required data. With this wireless 802.11 site survey tool, users can create "what-if" scenaros to simulate a variety of changes to the network and preview the impacts. Options include changing access point transmit power, channel, SSID settings and the addition of environmental noise. Users can also simulate moving access points to new locations and preview the effect of adding additional access points. AirMagnet Survey PRO empowers users with the option of creating an automated channel plan for access points that avoids interference and over-allocation. Outdoor Wireless Site Surveys With GPS support and integration with Google Earth, AirMagnet Survey PRO provides fully-automated outdoor wireless site surveys. Users can leverage NMAE-compliant GPS devices to automatically collect outdoor wireless data. Users also can import street maps of any city in the world, and have the option to analyze results within the AirMagnet Survey user interface or exported into Google Earth for a zoomed-in view to any street within the city. RF Spectrum and Voice-over-WLAN Surveys Beforem making any design and deployment decisions, users can account for RF interference from non-WiFi devices. Users who own AirMagnet Spectrum XT can collect both WiFi and spectrum analysis data in a single survey and integrate the data into AirMagnet Survey. With this integration, users can visualize the RF energy at any location and identify/display the presence of non-802.11 devices interfering with the WLAN. AirMagnet Survey addresses the challenges faced by network installers and IT staff when deploying VoWLAN networks. With a built-in voice readiness verification system, AirMagnet Survey allow users to ensure that their network design is aligned with the recommendations of the phone vendor. This system also allow users to perform real-world voice surveys by validating and plotting phone call quality, capacity and other voice specific parameters at every location on a floor map helping to identify and minimize issues. Validate user and Application Requirements The AirWise engine allows users to set wireless network design/application requirements, such as signal coverage, wireless network throughput, PHY data rates, 802.11 specific parameters and more to help identify any problem areas. Once set, users are alerted to the areas on the floor map that meet, or do not meet the requirement, enabling them to take the necessary action to solve the coverage, performance or capacity problems. AirWise includes the option to create profiles based on real-world survey data or wireless network modeling data that can be used to verify WLAN deployment readiness for a variety of applications. This single-click assessment of the WLAN network helps save time, effort and money by avoiding costly re-designs of the WLAN network and minimize IT troubleshooting costs. Users can generate a Pass/Fail report that enables an efficient hand-over of results of the survey to the installer or the end-customer. Professional Custom Reports AirMagnet Survey PRO includes a completely integrated reporting module that instantly creates custom outputs of site survey and simulations. Customized templates provide wireless 802.11 site survey users with flexibility by creating various reports based on project requirements. Users can customize reports further by including/excluding sections, adding in notes and customizing logos, headers and footers amongst many other customizable options. Reports can be saved in multiple formats, such as PDF, XML, HTML, Excel or Word. Visualize Coverage and Performance Differences Over Time WiFi environments are very dynamic and to guarantee the best performance for end-users, it is important to be able to verify changes in coverage and performance in the network. AirMagnet Survey´s Diff View feature allows side-by-side visualization of differences between two separate surveys. The Diff View feature helps display how a site´s wireless environment has changed over time. This view is a great tool for System Integrators to drive repeat business of validating the coverage and performance of the network on an on-going basis. Likewise, users can use this feature to quickly compare AirMagnet Planner results with actual site survey results. This information can the be used to fine-tune the dl losses for the building and environmental conditions within Planner for more accurate planning. Integration with WLAN Infrastructure Vendors AirMagnet Survey allows exporting of real-world survey data to Cisco Prime. This is critical for, not only calibrating Cisco´s built-on planner modeling capabilities but also for specialized applications. For example, location services that mandate a calibration site survey for maximizing location accuracy for WLAN clients, or tags and VoWLAN servics that recommend the use of site surveys to validate real-world data versus the predictive capabilities of the infrastructure. Take advantage of the planning capabilities built inside AirMagnet Survey PRO by creating and exporting planner projects directly into Cisco Prime. This integration eliminates the need to repeat these tasks within Cisco Prime, saving users time and resources needed, in setting up of maps, access point placement locations and other WLAN deployment modeling activities. System Requirements for Laptop/Notebook/PC/Tablet PC: Operating Systems: Microsoft Window 8.1 Pro / Enterprise 64 bit or Windows 10 Pro / Enterprise 64 bit Intel Core 2 Duo 2.00 GHz (Intel COre i5 or higher recommended) 4 GB or higher 800 MB free hard disk space USB port or multiple ports in the PC when using multiple adapters AirMagnet-supported wireless network adapter(s) or AirCheck G2/EtherScope nXG with AirMapper (recommended) Optional: AirMagnet Spectrum XT Adapter and license (required for viewing spectrum data and heat map; Survey PRO only) A site map in a format supported by AirMagnet Survey (supported formats are: .bmp, .dib, .dwg, .dxf, .emf, .gif, vsd, .jpg, .wmf, .vdx or .png Google Earth must be installed in order to export the GPS data for outdoor surveys to Google Earth (Survey PRO only) Supported GPS device. Here is a list of GPS devices that have been approved for use with the AirMaget Survey product: Gamin eTrex LEGEND HCx Garmin eTrex Garmin eTrex Legend Garmin GPS18X USB Garmin GPS 18 Deluxe Microsoft GPS-500 SIRF III DeLorme Earthmate GPS LT-20 Magellan eXplorist 500 Pharos iGPS-180 US GlobalSat Buz-353-S4 (recommended) System Requirements for Apple Macbook PRO: Operating Systems: MAC OS X v10.5 (Leopard) or higher running a supported Windows OS (as noted under Laptop/Notebook/PC/Tablet PC section) using Boot Camp Intel based CPU 1.6 GHz or higher 4 GB or higher 800 MB free hard disk space USB Port or multiple ports when using multiple adapters AirMagnet-supported wireless network adapter(s) or AircheckG2/EtherScope nXG with AirMapper (recommended) Optional, AirMagnet Spectrum XT Adapter and license (required for viewing spectrum data and heat map; Survey PRO only) A site map in a format supported by AirMagnet Survey (supported formats are: .bmp, .dib, .dwg, .dxf, .emf, .gif, vsd, .jpg, .wmf, .vdx or .png) Google Earth must be installed in order to export the GPS data for outdoor surveys to Google Earth (Survey PRO only) Supported GPS device. Here is a list of GPS devices that have been approved for use with the AirMagnet Survey product: Garmin eTrex LEGEND HCx Garmin eTrex Garmin eTrex Legend Garmin GPS 18 Deluxe Garmin GPS18X USB Microsoft GPS-500 SIRF III Garmin GPSMap 60 DeLorme Earthmate GPS LT-2 DeLorme Earthmate GPS LT-40 Magellan eXplorist 500 Pharos iGPS-180 US GlobalSat BU-353-S4 (recommended) Supported Adapters: AirMagnet Survey supports two categories of wireless adapters: Preferred Adapters: These adapters have been comprehensively tested by AirMagnet and are recommended for use with AirMagnet Survey PRO. Drivers have been customized for extended feature support. Visit netally.com/products/airmagnet-survey-pro Other Adapters: These adapters can be used with AirMagnet Survey PRO but have not been tested by AirMagnet. Drivers have not been customized, will provide limited features and could provide inaccurate data Note: NetAlly is not responsible for the quality of the test results collected using WiFi adapters not included on the Preferred category. Authentications supported by various adapters vould be limited by their own capabilities, Windows wireless zero configurations and various other reasons.Available downloads: Download AirMagnet Survey PRO Data Sheet Download Site Survey Best Practices - White Paper Download 802.11 USB Adapter USB FL 20 V2 Download AirMagnet Survey PRO Preferred Adapters Download AirMagnet Survey PRO - Comparison Table

Price on request
Tip
netool.io PRO Network engineering tool
Smart and hand held network tester for monitoring and troubleshooting in active networks With the netool.io PRO you combine all important tools for network analysis and troubleshooting in one device. Due to the compact design, the netool.io PRO fits in every trouser jacket pocket. The operation and reporting is done per operation system independent via free app for Windows, MacOs, iOS and Android. This gives you the flexibility and ability to perform packet capture or network analysis on your network at any time. The most important asisstent  for every network administrator who wants to ensure the control and monitoring of his network at all times !   Your benefits: Packet Capture / PCAP Capture: Collect packet data from your network at any time via the USB interface of the Netool.io PRO in order to be able to analyze them in detail at your workstation at a later time, as a PCAP file. Transfer your recorded package file to a connected USB stick. (San Disk sticks recommended) Use the additional filter function to filter data packets, for example HTTP packets Convert .pcap files to text format for quick analysis   Protocol detection: Netool.io PRO identifies ethernet protocols, analyzes them and shows them to you via the app Packet capture: capture to PCAP - caputure packet data from your network at any time via the USB interface of the Netool.io, in order to be able to analyze them in detail at your workplace at a later time as a PCAP file. Supported ethernet protocols and services: VLAN, DHCP, 802.1X, EAp, CDP and LLDP, LACP, Spanning Tree Connectivity check: RUN ICMP tests to the internet, local gateway or a custom IP. Easy to use: Get network information quickly and easily on your Android or iOS smartphone, tablet or Windows / Mac notebook ! Compact: The most compact network tester on the market ready to use anytime and anywhere ! Share the test result: Share discovered information about any text-based app, including text messaging, email, Evernote, Slack and more. WiFi Access Point Mode: In case no Wifi is available, you can connect the Netool.io in client WiFi mode or allow other users to connect and evaluate test results. netool.OS: On Netool.io devices a highly customized Linux version is running, which we call Netool.OS. We have developed Netool.OS to be powerful, energy saving and wirelessly upgradeable. Netool.cloud: With Netool.cloud, remote users can connect to your Netool.io or a remote site´s Netool.io to view and run tests from anywhere.   Supported operating systems: Netool.io app is availble for; iOS, Android, MacOS, Windows Supported ethernet network protocols: VLAN, DHCP, 802.1X, EAP, CDP and LLDP, LACP, Spanning tree, SSH, VLAN, IPv6 Security protocols: Supported protocols for SSH: AES 125 and passpharse Operation time: 12 hours Battery capacity: 2600 mAH Battery type: rechargeable Li-Lon battery Connections: 1x RJ45, 1x USB, 1x Micro USB Weight: 200 gr. Size: 95 x 25 x 25 mm (L x W x H) Certifications: CE, RoHS   Included in delivery: 1x Netool.io network engineering tool 1x ethernet network patch cable 1x AC power adapter 1x USB cable

€355.81*
Tip
The Accelerator Compact PoE + Battery Pack V2
Specifically designed for use at site surveys, it´s small, compact design and battery capacity allow for many hours of continuous use. It is the ultimate site survey tool and a must have for all Wi-Fi engineers! Great for performing wireless site surveys, portable IP camera set up´s, temporary wireless bridge connections, and charging mobile phones and tablets. Multiple PoE outputs Lightweight and portable Charge while in use LCD display toggles between battery percentage and voltage Operating voltage: 110-220V Battery input (2.1mm): 12.6V DC, 2A Battery output (2.1mm): 12V, 2A PoE Output: IEEE 802.af, 802.3at & 802.3bt (Type 3 & 4) complaint USB 2.0 Output: 5V DC, 2A USB C Output: Up to 20V, 5A Battery Type & Capacity: Lithium-Ionnen 7500 mAh 12.6V/94.5 Wh Dimensions 5.5" H x 3.9" W x 1.875" D (140 mm x 100 mm x 48 mm) Operating temperature: 14-140F (-10 to 60 C) Colour: Black Included in delivery: 1x Accelerator Battery Pack Version 2 1x one portable carrying bag 1x one wall charger 1x 2.1 mm plug-plug connection for the 12V output Available downloads:Download The Accelerator Site Survey Battery Pack V2 Data Sheet

€680.68*
Tip
Aluminium tripod, black anodised pushed out length 10,50 Meter
This aluminium high tripod is manufactured by a family owned factory in Germany. With an extended length of 10.50 meter and a load capacity of up to 8 kilos, the aluminium high tripod is perfect for WiFi Site Surveys in logistic warehouses, various types of factories and distribution centres. Due ot the inserted length of 1.90 meter and a transport weight of approx. 28 kilos, this aluminium high tripod is very easy to transport.  The aluminium high stand consists of an aluminium round mast to which four feet are attached. The individual feet are telescopic so that small unevennesses in the terrain can be compensated. The round masts consist of several aluminium tubes that are inserted into each other and polished on one side and pushed out by hand. The sturdy clamps securely lock the extended tubes in place.    The maximum permissble extension lenght is limited by a marking ring. There is no fixed stop when pulling out. There are two markings for safety. When the first mark is reached, the telescopic tube should then be slowly pushed out to the second mark and locked in place by the clamp when this is reached.  The aluminium high tripod and the round mast are made of anodised aluminium round tubes (AlMgSi05 F22) with a 2 mm wall thickness. The own weight is approx. 28 kilos and is therefore very low.  ** Note: When using the aluminium high tripod with a head load, bracing must be carried out depending on the existing wind conditions.**   Aluminium high tripod, black anodised 10.50 metres extended height Inserted length: 1.90 metres Extended length: 10.50 metres Colour: black anodised Tube diameter (mm): 70/65/60/55/50/45/40 Material: Aluminium Load capacity: up to 8 Kilo Transport weight: approx. 28 Kilo  Head: 1/4" photo thread (removable) Country of origin: Germany

€1,789.90*
NetAlly EtherScope nXG Portable Network Expert
Overview The EtherScope nXG Portable Network Expert is a multi-technology, all-in-one handheld network analyzer that enables engineers and technicans to get more done faster, from deployment to maintenance and documentation of their everchaning Wi-Fi and Ethernet access networks. With its simple operation, yet in-depth visibility, and the ability to remotely access and control EtherScope nXG, engineers can now fully enable and leverage the "locals hands" of field technicians, to expedite problem-solving. Test, verify, and troubleshoot technology upgrades, NBASE-T, 10G and Wi-Fi networks with advanced Android based troubleshooting apps and purpose built test hardware Verify up to 10G Ethernet link performance for critical servers, uplinks and key end devices, and validate Wi-Fi network performance Empowers technicians who may not have access to network management systems or other engineer-level tools, to assess and document complex network deployments with multiple VLANs and Wi-Fi SSIDs Enables remote engineers to troubleshoot and collaborate with on-site technicians to solve tough problems at remote sites, saving time and cost of travel Seamlessly consolidate, analyze, and manage field test data, and integrate with network management systems via the complimentary Link-Live Cloud Service Automatically discover and instantly map your wired and Wi-Fi networks using Link-Live cloud service; speeds troubleshooting and keeps network documentation up-to-date. Exports to Visio Key Features All-in-one to address multiple technologies The EtherScope nXG Portable Network Expert has two sets of native Wi-Fi network interfaces: a 4x4 adapter to scan and test Wi-Fi networks, and a 1x1 adapter for remote control connection and testing. Both interfaces support 802.11 a/b/g/n/ac/ax and can show analysis of utilization and status of Wi-Fi channels, SSIDs, BSSIDs, access points, client devices and interferers. The EtherScope nXG Portable Network Expert provides visibility of Wi-Fi 6 devices. The EtherScope nXG Portable Network Expert has two Ethernet ports. The main test RJ-45 port supports Multi-Gig networks from 10/100/1000 Mbps to 2.5/ 5 /10G to verify link speed SNR, and duplex advertised and connected. It can request and verify PoE power under loan from up to 90W PSE´s. Alternatively, it can interface to fiber networks via single/multi SFP+ to test 1/10Gbps fiber based Ethernet. The second RJ-45 management port connects to 10/100/1000 Mbps Ethernet for remote control, and conducts network scanning and tests where needed. It is also the port for cable testing. The EtherScope nXG Portable Network Expert has built-in Bluetooth v5/BLE and USB interfaces to discover and configure nearby devices. Simplifies tasks and empowers technicians to verify commplex networks with next generation AutoTest The EtherScope nXG Portable Network Expert has out-of-the-box AutoTest profiles with best practice pass/fail thresholds for quick assessment of network configurations and services of Wi-Fi and wired networks. Ethernet Network: switch port poE characteristics, VLAN Tagged traffic detection, 802.1x authentication, link speed advertised vs negotiated, DHCP/DNS/Gateway availability and accessibility. Air Quality: assess numer of APs, co-channel and adjacent channel interference, and channel utilization Wi-Fi Network: supports various authentication and security schemes to connect to SSIDs/BSSIDs for coverage by signal/noise, and DHCP/DNS/Gateway availability and accessibility. Multiple profiles can be created for complex networks with multiple VLANs supported per switch port, and Wi-Fi networks with multiple SSIDs each with its own set of IP targets. These can then be organized into profile groups that execute each test against each profile in sequence. The result is that multiple VLANs, and SSIDs can be verified and documented in one go. Since the pre-defined profiles can be executed individually, the profiles group serves as a resource for technicians to verify each specific VLAN or SSID during troubleshooting. With profile groups, engineers can transfer their network configuration and test knowledge to technicians, saving training time and effort. 24-Hour Monitoring for Intermittent Issues Periodic AutoTest: In this mode, AutoTest runs at specified intervals (from 1 minute to 24 hours) and sends the results to Link-Live to view the results over time. This is an effective way to "monitor" aspects of your network for an extended period, or to help diagnose intermittent issues without having to manually execute multiple tests. Results are automatically timestamped and can be prefixed with a user-entered comment for grouping or organization. Test results can be quickly analyzed in Link-Live using the filtering and sorting functions. Email notifications can warn you when errors are found. A number of additional enhancements in version 1.2 expand the use models for EtherScope nXG Portable Network Expert, provide more actionable information, and make the network analysis process even more efficient. See the EtherScope nXG v1.2 release notes for additional information. Multi-Gig Link Validation With the expanding deployment of Multi-Gig switching (typically to feed greater bandwith to Wi-Fi 6 access points), users are finding that their cable plant may not support the desired speed. Cable quality, length, installation workmanship, and noise in the environment all can contribute to "downshifting" to lower-than-expected-speeds. Cabling SNR Measurement The EtherScope nXG Portable Network Expert can now verify copper media for Multi-Gig capability (1 / 2.5 / 5 / 10G), and provide root cause diagnosis when link speed downshifting occurs. List of Problems Automatically Detected by EtherScope nXG Portable Network Expert Wired Network Problems: Bad Subnet Mask Duplicate IP Address DHCP Server not responding EtherScope nXG received multiple DHCP offers EtherScope nXG received used IP from DHCP EtherScope nXG lost DHCP lease max clients on SSID high interface utilization* high interface errors* high FCS errors* high packet discards* detected half-duplex interfaces high CPU utilization* high disk utilization* high memory utilization* recent device reboot* Spanning tree topology change SNMPv3 agent responded to SNMPv1/v2 query Wi-Fi network problems: AP with encryption disabled client with encryption disabled using open authentication using shared key authentication high utilization on channel* high retries on channel* high non-802.11 utilization on channel* co-channel interference threshold (#AP)* co-channel interference AP signal level* high utilization on AP* AP overloaded with clients* high retries on device* BSSID channel changes* RF regulatory violation Wi-Fi AutoTest - Link Validation The Wi-Fi AutoTest runs a series of tests by connecting to a selected wireless network (associate to an AP), providing a status indication of success, warning or fail. This comprehensive test validates not only the Wi-Fi connection, but also each critical supporting network device. (Note: Wi-Fi AutoTest supports connecting to captive portals where a sign-in is required for access; see user guide for instructions.) Wi-Fi Link Test - validates the ability to connect to the selected network. Drilling into the link test provides in-depth information about the SSID, signal strength/SNR, channel utilization, retries and PHY rate. Of note, roams indicates the number of times the unit has disconncted from the previous AP and connected to a different AP with a better signal strenght. The Wi-Fi Link Test graphs save and display data for up to 24 hours in the past, providing a way to "go back in time" to identify specific problem instances. Channel Test - shows the channel on which the AP is operating and the current 802.11 and non 802.11 utilization in real time and plots the percentage of channel capacity used by devices and non 802.11 interference. AP Test - shows the AP name and SSID of the network it supports, its IP and MAC addresses, security, channel (if the BSSID is on multiple channels, the bold number indicates the primary), 802.11 types supported, and client associations (number of clients connected to the AP). DHCP, NS, Gateway results - these validate the availability and performance of critical network services via the Wi-Fi network. Diagnostics on each test provide details on response times and logs for troubleshooting. Path Analysis - can be run from the above network services tests to identify the connection path to the specified service (or server), this is useful to determine if errors or excessive utilization on the wired network may be affecting the particular service. Air Quality Test The Air quality test performs a single scan of the channels in your wireless network to measure channel utilization and interference. Each table on the air quality results screen shows the top four channels in each band with the highest utilization or co-channel interference, along with the number of APs operating on the channel including adjacent channel interference detection in the 5 GHz band (to detect 40 and MHz-wide overlapping BSSIDs). Channel utilization and interference Quickly determine if channels are over utilized with Wi-Fi traffic and/or with non Wi-Fi interference and noise. You can also gain visibility on the level of Wi-Fi traffic and interference over the last 60 seconds on a selected channel, as well as, the access points, clients and interferers using this channel. Drill into details and detect devices that can cause interference, such as, microwave ovens, wireless game controllers, Bluetooth devices, Zigbee devices and wireless video camera. Automated problem detection EtherScope nXG Portable Network Expert automatically diagnoses various conditions on both wired and wireless networks and identifies specific problems. Tapping the problems card shows all discovered issues, which can be sorted by severity or time detected. Drill in to see a detailed description of the problem and recommended course of action to mitigate. 10G copper/fiber wired and Wi-Fi performance tests for critical links and key devices The EtherScope nXG Portable Network Expert can stress critical network links, such as switch ports to servers/storage/Wi-Fi access points, uplinks or WAN links, with up to four simultaneous data streams at up to 10G line rate. It verifies the link´s compliance to service level agreements (SLA) based on throughput, packet loss, Qos, delay and jitter against peers such as EtherScope nXG, LinkRunner10G, OptiViewXG, or a windows based software reflector agent. Settings for data streams and thresholds for VOIP or video service can be stored and recalled where needed, saving configuration time. Additionally, the EtherScope nXG can use the popular iPerf v3 network test algorithm to test against the NetAlly test accessory. It determines TCP or UDP application throughput through its Wi-Fi or wired interfaces. For key servers/services in the cloud or internet, engineers can pre-define tests and thresholds to verify their connectivity and performance using ping, TCP connect, HTTP or FTP. Continuous testing with response time measurements is available to verify consistency and identify intermittent issues. These tests can be easily recalled by field technicians to reduce configuration time or mistakes, to get more done faster. Performance Test relationships - EtherScope nXG Portable Network Expert can conduct performance tests through various end points TCP Connect test - TCP Connect test showing response time over time (up to last 24 hours) Auditing & documenting network security & health The EtherScope nXG Portable Network Expert automatically discovers your network through its dual set of Wi-Fi and Ethernet test interfaces immediately upon power up. The discovery provides quick security and health audits of the network devices across multiple VLANs and all Wi-Fi channels. Devices are classified and correlated to provide complete visibility of their name, network addresses, VLAN, SSID, deice type and where available, traffic statistics. Engineers can name and set authorization status for devices discovered. Discovery results can be directly uploaded to the complimentary Link-Live cloud service for storage, conduct detailed analysis of devices discovered with filter and sort tools, or export to CSV/PDF files as documentation. The EtherScope nXG Portable Network Expert correlates the discovery result from the wired and Wi-Fi networks and breaks the Layer 2 visibility ceiling. EtherScope nXG Portable Network Expert makes it easy to discover the actual identity of a Wi-Fi device by showing its name and IP address while most other Wi-Fi tools only show the MAC address. EtherScope nXG´s discovery can be enriched by accessing SNMP MIBs of infrastructure devices. It shows detail such as device configuration summary, interface configuration and traffic detail, SSIDs supported by WLAN controllers and devices directly connected to switches. Community strings entered are concealed from view. Discover possible security risks caused by users and others: 2nd DHCP offers indicating possible rogue servers, APs with different security schemes, unknown or unauthorized devices, unknown switches granting access to multiple devices and hidden SSIDs. EtherScope nXG´s "Batch Authorization" workflow allows the user to filter discovery data to be a subset of easily identifiable devices, then apply a "label" to the grouping (such as "Authorized" or "Neighbor") to the list of devices. Labeling known/acceptable devices makes it easy to sort/filter and identify unauthorized hosts in subsequent audits - so you have clear knowledge of who and what is on your network and whether they should be there or not.  The EtherScope nXG Portable Network Expert discovery automatically detects problems. It shows possible cause(s) for each problem detected, and it has integrated troubleshooting tools to investigate further to get to root cause.  Network topology mapping - integrated wired and Wi-Fi  network diagrams No more struggling to keep manually drawn maps up to date! EtherScope nXG Portable Network Expert automatically discovers both your wired and Wi-Fi networks for instant mapping in NetAlly´s Link-Live cloud service. These comprehensive, up-to-the-minute-accurate network diagrams show your network as it is NOW, integrating Layer 2 and Layer 3 topology informatio, including these connections: switch to host, switch to access point, access point to Wi-Fi client, switch to switch, switch to router and router to router hops. Now, users can now interact with the network in a flexible map based user interface to quickly visually identify configuration and topology issues, speeding troubleshooting and automatically create network documentation. EtherScope nXG´s patented discovery engine gathers data from its wired connection (via SNMP and other methods) and from the air (observing Wi-Fi traffic) to generate comprehensive network connectivity maps.  Easy to use filters and map controls allow you to see exactly what you want and how you want it displayed. Quickly identify network and device configuration errors, and see "unknown" switches and rogue devices. Element icons are color-coded to identify errors or warnings; double-clicking on any map element brings up its detailed discovery information, including status, problems, interface information and more. NOTE: customers with AllyCare get access to in-depth map configuration, controls and export to Visio. For information about AllyCare, go to support.netally.com/allycare/ The importance of visualizing your network The faster engineers can "see" what is going on in their network, to know who is on the network and where they are connected and what the path is from "here to here", the faster they can get to root cause when troubleshooting performance issues. This is especially true for maintenance organizations or system integrators who often troubleshoot an "unknown" network. The problem is that traditional methods (CLI or element managers) take too long and present complex data that´s often hard to interpret and difficult to correlate. Documentation is an essential step for any project, such as pre-deployment network assessments and new technology rollouts, but it can take too much time to complete. From the graphical map based user interface, one click sends the map data through a Visio file generator, pre populating the diagram with all discovered devices, links, and corresponding configuration information, saving hours of manual effort, allowing further customization. Ideal for enterprises or service organizations, EtherScope nXG´s mapping function saves hours of manual labor, allowing documentation to keep up as the network changes, or provide instant maps for client projects. Simple "access-anywhere" remote control enables collaboration The EtherScope nXG Portable Network Expert has dedicated Wi-Fi and Ethernet management ports that enable a more experienced/knowledgeable remote engineer to control the EtherScope nXG "out of badn" (using VNC) to collaborate with technicians on-site, or to troubleshoot remotely where there is no local staff. But connecting to distant sites via VNC on different networks is difficult or impossible, particularly behind NAT firewalls. With AllyCare-enabled web remote control feature, users can instantly connect to remote units through the Link-Live cloud service - anywhere in the world - for collaborative and remote troubleshooting. At locations with no internet service, the Wi-Fi management port can connect to a personal Wi-Fi hotspot for remote control and upload results to the Link-Live cloud service. Automated test results management Serving as a centralized test result and instrument management system, the complimentary Link-Live cloud service transforms team workflows with the ability to quickly and easily log, document and report test activity from any NetAlly LinkSprinter, LinkRunnerAT, LinkRunner G2, AirCheck G2, OneTouchAT and EtherScope nXG Portable Network testers. Once the tester is connected to the Link-Live cloud service, your test results are automatically uploaded to the dashboard for project management and reporting. You have the option of uploading additional files, screenshots, images, profiles, packet captures, location information and comments anytime. Also, certain NetAlly testers with AllyCare support can receive firmware updates "over the network" from Link-Live as they become available. An API is available to retrieve and integrate data from Link-Live into other management platforms, such as your trouble-ticket application or network management system. It gives you the ability provide proof-of-performance and better manage jobs and staff efficiency. This unified dashboard of both wired and Wi-Fi network connectivity results enables you to: Reduce results managemnt overhead for multiple testers and users Enables seamless collaboration between site personnel and remote experts Simplify report generation across media types for network deployment documentation Attach photos, user comments to each result, adding context for future changes and troubleshooting For asset management, ability to associate serial numbers of installed devices, and/or cable/walljack label to specific test results Multiple advanced troubleshooting tools in one Path Analysis: shows the switch/router path connecting the EtherScope nXG to an IP device on across wired and Wi-Fi networks and even beyond the local network, e.g., from the EtherScope nXG´s Wi-Fi port to a server in the cloud or data center on the internet. The EtherScope nXG Portable Network Expert offers built-in tools to conduct further analysis of the devices along the path: view configuration, interface traffic statistics, launch Telnet or browser, conduct port scan, ping and more. Packet capture: from both the Wi-Fi and Ethernet test interfaces. You can capture up to 10G line rate to create a PCAP file of up to 1 GB. Packet slicing and filtering are supported and PAP files can be uploaded to the Link-Live cloud service for easy sharing. Cable test: determine lenght, shorts, and split pairs and locate opens on UTP cable. Verify the wiremap of UTP and ScTP cable with a WireView adapter. It can generate either analog tone or the unique digital tone for the Fluke Networks IntelliTone Probe for quick cable tracing. Android Apps: Users can download apps from the Link-Live app store to accomplish many tasks in addition to testing.  Optical power meter When connected with fiber, the AutoTest Link card has been augmented with the ability to set a reference and display the current power reading relative to that reference. This is useful for saving the power level at the source as a reference, then measuring the fiber power loss at the far end. EtherScope nXG Controlled Edition Allows administrators to temporarily or permanently hardware-disable selective features for restricted environments With the Controlled Edition, administrators can be disable specific EtherScope capabilities allowing the analyzer to be used in restricted or secure environments. The Controlled Edition is ideal for military and agency use, as well as highly secure enterprises. Control may be teporarily achieved via a secure administrator password. To make the controlled configuration permanent, the administrator follows a clear workflow that fully disables the selected functions using eFuses in silicon, that once burned, cannot be reversed, ensuring the security of the unit. Builds upon the enterprise hadened EtherScope to allow hadening by removing capability Allows custom granular control of the exact features and capabilities to be permanently disabled The camera is physically removed while retaining the opening for flashlight operation User accessible deep erasure of all test data upon leaving secured environments Specifications Dimensions: 10,3 cm x 19,5 cm x 5,5 cm Weight: 0,76 kg Battery: Rechargeable lithium-ion battery pack (7,2 V, 6,4 A, 46 Wh) Battery life: Typical operating life is 6 hours; typical charge time is 3 hours Display: 5,0 inch colour LCD with capacitive touchscreen (720 x 1280 pixels) Host Interface: RJ-45 cable test and management port, USB Type A port, USB Type C on-the-Go port SD card port: supports micro SD card storage - up to 32GB supported Memory: Approx. 8 GB available for storing test results and user applications Charging: USB Type-C 45-W adapter; AC input power 100-240V, 50-60 HZ; DC output power 15 V (3 A); RJ-45: 802.3at and 802.3bt PoE Media Access: Copper: 10M/100M/1G/2,5G/5G/10G - Fiber SFP Adapters: 1G/10GBASE-X Supported IEEE Standards: Wired: 802.3/ab//ae/an/bz/i/u/z - Wi-Fi: 802.11a/b/g/n/ac/ax - PoE: 802.3af/at/bt, Class 0-8 and UPOE Cable test: Pair lenghts, opens, shorts, splits, crossed, straight through and WireView ID EtherScope nXG has two internal Wi-Fi radios: Wi-Fi testing - 4x4 Dual-band 802.11ac Wave 2 wireless radio Android system Wi-Fi, Bluetooth and Management - 1x1 Dual-band 802.11ac Wave 2 + Bluetooth 5.0 and BLE wireless radio (both are IEEE 802.11a/b/g/n/ac/ax compliant) Specification compliance: IEEE 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac, 802.1ax - Note: The tester provides 802.11ax visibility using an 802.11ac radio Wi-Fi connectivity: 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac, 802.11ax - Note: The tester connects to 802.11ax networks using an 802.11ac radio Operating frequencies - Note: These are the center frequencies of the channels that the AirCheck G2 tester supports. Frequencies of channels received: Note: The tester receives on all of the frequencies in very country. 2,4 GHz band: 2.412 - 2.484 GHz (channel 1 to channel 14) 5 GHz band: 5.170 - 5.320 GHz, 5.500 - 5.700 GHz, 5.745 - 5.825 GHz (channels 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165) Frequencies of channels transmitted: Note: the tester transmits only on the frequencies allowed in the country whre it is operating. 2,4 GHz band 802.11b: 2.412 - 2.484 Ghz (channel 1 to channel 14) 802.11g/n 20 MHz BW (HT20): 2.412 - 2.472 GHz (channel 1 to channel 13) 802.11n 40 MHz BW (HT40): 2.422 - 2.462 GHz (includes all combinations of legal, bonded pairs of channels) 5 GHz band 802.11a/n 20 MHz BW (HT20): 5.180 - 5.320 GHz, 5.500 - 5.700 GHz, 5.745 - 5825 GHz (channels 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 144, 149, 153, 157, 161, 165) 802.11n 40 MHz BW (HT40/VHT40): 5.190 - 5.310 GHz, 5.510 - 5.670 GHz, 5.755 - 5.795 GHz) includes all combinations of legal, bonded pairs of channels) 802.11ac 80 MHz BW (VHT80): 5.210 - 5.290 GHz, 5.530 - 5.690 GHz, 5.775 GHz (includes all combinations of legal, bonded pairs of channels) Internal Wi-Fi antennas: Three interal 2,4 GHZ, 1.1 dBi peak, 5 GHz, 3.2 dBi peak antennas External directional antenna: Antenna, frequency range 2,4 - 2,5 and 4,9 - 5,9 GHz. Minimum gain 5,0 dBi peak in the 2,4 GHz band and 7,0 dBi peak in the 5 GHz band Operating temperature: 32°F to 113°F (0°C to +45°C) / Note: The battery will not charge if the internal temperature of the device is above 112°F (50°C) Operating relative humidity (% RH without condensation): 90% (50°F to 95°F; 10°C to 35°C) - 75% (95°F to 113°F; 35°C to 45°C) Storage temperature: -4°F to 140°F (-20°C to 60°C) Shock and vibration: Meets the requirements of MILPRF-28800F for Class 3 Equipment Safety: IEC 61010-1:2010: Pollution degree 2 Altitude: Operating: 4.000m, Storage: 12.000m EMC: IEC 61326-1: Basic Electromagnetic Environment; CISPR 11: Group 1, Class A Certifications and Compliance conforms to relevant European Union directives conforms to relevant Australian Safety and EMC standards complies with 47 CFR Part 15 requirements of the U.S. Federal Communications Commission listed by the Canadian Standards Association NPT Reflector software agent supported operating sytems: Windows 8.1, Windows 10, Windows 2008-R2, Windows 2012, Windows 2012-R2, Windows 2016 and Windows 2019 minimum hardware requirement CPU: 1 GHz or better CPU minimum hardware requirement RAM: 1 GB or more RAM minimum hardware requirement Harddisk: 1 GB available space network interface: Ethernet and/or WiFiAvailable downloads: Download EtherScope nXG Quick Start v1.2 Download EtherScope nXG User Guide v1.4 Download EtherScope nXG Data Sheet

Price on request

Mounts

Tip
Horizontal wall mount for Cisco series and Juniper Mist access points
Horizontal wall mount for Cisco series and Juniper / Mist Access points made of tin with closeable lid.   Material: 1mm tin Colour: white or coated Weight: approx. 890 gr. Measurements: L x W x H in mm: 227 x 150 x 122 mm     compatible with following Cisco series: 1500 series 1600 series 1700 series 1800 series 2600 series 2700 series 2800 series 3600 series 3700 series 3800 series 4800 series 9100 9105AX 9115AX 9117AX 9120AX 9124AX 9130AX 9136 9164 9166     compatible with following Juniper/Mist access points: AP34 AP41 AP43 AP45Available downloads:Download CM-CAPWLL-1 Datasheet 

€89.95*
Tip
Industrial ceiling mount for Cisco Access Points
With the offered bracket many current Cisco Access Points can be mounted on industrial ceilings. The bracket is completely white powder coated and therefore very scratch and impact resistant. Cisco Access Points of the series are compatible: AP3800, AP3700, AP3600, AP3500, AP2800, AP2700, AP2600, AP1600, AP1260, AP1140, AP1040. The antennas and access points are not part of this product. In addition to this system, we have other mounts to offer you. We manufacture these ourselves and can also offer higher quantities at short notice.

€69.00*
Tip
Combined mount for Cisco Access Points and Patch Antenna
With the offered mounting bracket the Cisco AIR-ANT2566P4W-R 6dBi patch antenna can be mounted space saving and visually appealing together with many current Cisco Access Points. The antenna part can be swivelled vertically for optimum alignment. The holder is completely white powder coated and therefore very scratch and shock resistant. Cisco Access points of the following series are compatible: AP3800, AP3700, AP3600, AP3500, AP2800, AP2600, AP1600, AP1260, AP1140, AP1040. The antennas and access points are of course not part of this article. In addition to this system, we have other mounts on offer. We manufacture them ourselves and also can offer higher quantities at short notice. Colour: available in RAL9010 white or coated

€99.95*

The WiFi Stand

Tip
The WiFiStand Bracket XL
The WiFiStand Bracket XL is built for larger access points like the Meraki MR42 and MR52 as well as other access points that require a little more room! It features a full 12" wide opening! Here's a comparison between the XL and standard bracket:   Built with direct input from the WiFi users community, the WiFi Bracket 2 features a swiveling top bar to assist with portability, durability, and flexibility! Also new is an additional thickness to the bracket to support upcoming equipment weights! With a full 360-degree rotating beam, reinforced by dual steel studs, you can quickly transport your bracket and attached wireless device without ever having to remove the rail mounts! In addition to the ease of use, the swiveling beam allows for more flexibility of the bracket when a device is attached, providing less of a burden on the standard 1/4-20 mount. Featuring a standard rail mimicking a drop ceiling T-Rail, the WiFi Stand Bracket 2 is a quick and easy way to mount Wi-Fi access points where you need them, when you need them. Made of industrial strength PVC, machined aluminum connection points, and finished off with all contoured and beveled edges, the ultra-light and easily transportable bracket can go with you wherever you need it! Bracket Dimensions: OD 8" x 14" (H x L) ID 6" x 12" (H x L) Please note: Stand is not included with purchase, this is for the bracket only. Each bracket attaches to a universal 1/4-20 threaded screw found on most tripods and stands. Please see our store for recommended stands to attach bracket to.

€89.90*
The WiFiStand Vertical Bracket
When deploying, testing, or temporarily placing wireless Access Points, sometimes you need creative placement to mimic coverage or geht into a tight space. The WiFi Stand vertical Bracket is here to help, giving you a way to mount an Access Point at a 90-degreee angle. Built with input from the WiFi users community, our vertical Bracket is made of the same solid, durable, and lightweight Industrial grade PVC and milled aluminium. An added touch to this bracket is the raised edge along the rail to keep your Access Points from sliding all the way off! Built around the standard 1/4-20 mount to attach universally to tripods and stands, as well as the 24mm drop-ceiling T-rail for the widest product support, our WiFi Stand brackets have already received international recognition throughout the industry. Now, we once again take user input into consideration and present our vertical bracket! Please note: Stand is not included with purchase, this is for the bracket only. Each bracket attaches to a universal 1/4-20 threaded screw found on most tripods and stands. Please see our store for recommended stands to attach bracket to.

€61.90*
The WiFiStand Rail
The WiFi Stand Rail allows you to quickly and easily mount a wireless access point on a standard T-Rail, even when there is no drop ceiling! Attach it to a 1/4" 20 threaded screw and slide your access point on! Made of the same industrial strength PVC, machined aluminum connection points, and quality that the WiFi Stand Bracket is made out of, this ultra-light and easily transportable rail can go with you wherever you need it! Please note: Mounting hardware is not included with purchase.

€33.90*
The WiFi Stand Bracket Version 2
The WiFiStand Bracket 2nd Version is our globally popular Wi-Fi Stand Bracket! Built with direct input from the WiFi users community, the Wi-Fi Bracket 2 features a swiveling top bar to assist with portability, durability, and flexibility! Also new is an additional thickness to the bracket to support upcoming equipment weights! With a full 360-degree rotating beam, reinforced by dual steel studs, you can quickly transport your bracket and attached wireless device without ever having to remove the rail mounts! In addition to the ease of use, the swiveling beam allows for more flexibility of the bracket when a device is attached, providing less of a burden on the standard 1/4-20 mount! Featuring a standard rail mimicking a drop ceiling T-Rail, the Wi-Fi Stand Bracket 2 is a quick and easy way to mount access points where you need them, when you need them. Made of industrial strength PVC, machined aluminum connection points, and finished off with all contoured and beveled edges, the ultra-light and easily transportable bracket can go with you wherever you need it! Bracket Dimensions: OD 8" x 12" (H x L) ID 6" x 9" (H x L)  Please note: Stand is not included with purchase, this is for the bracket only. Each bracket attaches to a universal 1/4 20 threaded screw found on most tripods and stands. Please see our store for recommended stands to attach bracket to. WiFi Bracket 2 is compatible with following hardware: Adtran Bluesocket: 1920, 1925, 1930, 1935, 2020, 2030, 2035, 3040, 3045 Aerohive: AP122, AP122X, AP130, AP230, AP245X, AP250, AP550, AP630, AP650, AP650X Arista (Mojo): C-100, C-110, C-120, C-130, W-118 Aruba: 200, 210, 220, 230, 300, 310, 320, 330, 510, 530 series Cambium: cnPilo e400, cnPilot e410, cnPilot e600 Cisco: WAP150, WAP371, WAP551, WAP561, 1815, 2800, 3800, C9115, C9117 Engenius: EAP1250, EAP1300, EAP1300EXT, EAP2200 Extreme Networks: AP3915, AP3935, AP505i, AP7522, AP7532, AP7622, AP7632, AP8432, AP8533 Fortinet: FAP-221E, FAP-223E, FAP-224E, FAP-321C, FAP-421E, FAP-423E, FAP-S221E, FAP-S223E, FAP-421E, FAP-U221EV, FAP-U223EV, FAP-U321EV, FAP-U323EV, FAP-U421EV, FAP-U423EV Meraki: MR32, MR33 Mist Systems: AP21, AP41, BT11 Ruckus: R310, R320, R500, M510, R510, R600, R610, R710, R720, R730 Ubiquity **: UAP, UAP-HD, UAP-NANOHD, UAP-AC-Pro, UAP-AC-HD, UAP-AC-SHD UAP-Pro, UAP-AC-LR, UAP-LR, UAP-XG (requires UAP-AC-Pro Kit) Xirrus: X2, XD2-230, XD2-240

€79.90*
WiFighter ist der erste und einzige offizielle Wi-Fi-Stand Distributor in Europa. mehr