Microsemi PoE High Power Splitter PD-AS-951/12-24

Product information "Microsemi PoE High Power Splitter PD-AS-951/12-24"

The Microsemi PowerDsine´s PD-AS-951 High Power active splitter enables data terminals that were not originally designed to accept power from the Ethernet, to be powered by Power over Ethernet midspans. The PD-AS-951 High power splitter (user selectable 12V or 24V) can power devices such as WiMax CPE´s, small WiMAX base-stations, 802.11n Access Points, Thin- Clients, PTZ (Pan/Tilt/Zoom) IP Cameras, Video Phones and more.

Many contemporary terminals are designed and deployed without the ability to accept power via their LAN input. Such devices can only accept power through ther DC jack while their RJ45 input accept only data. Moreover, such devices might only accept voltage levels lower than the PoE standard minium voltage (44v in IEEE802.3af / 50v in 802.3at). Using the PD-AS-951 high power splitter, these terminals immediately become PoE-ready without any modification required on their side.

The splitter is identified as a powered device (PD) in front of the powering Midspan and after being detected and powered, it physically splits the data and power streams, arriving over a single cable, into two seperate cords (LAN & DC) which go directly to the data terminal. Voltage regulation is also performed to the level required by the termin (12V or 24V.)


Available downloads:

Similar products

Tip
The Accelerator Compact PoE + Battery Pack V2
Specifically designed for use at site surveys, it´s small, compact design and battery capacity allow for many hours of continuous use. It is the ultimate site survey tool and a must have for all Wi-Fi engineers! Great for performing wireless site surveys, portable IP camera set up´s, temporary wireless bridge connections, and charging mobile phones and tablets. Multiple PoE outputs Lightweight and portable Charge while in use LCD display toggles between battery percentage and voltage Operating voltage: 110-220V Battery input (2.1mm): 12.6V DC, 2A Battery output (2.1mm): 12V, 2A PoE Output: IEEE 802.af, 802.3at & 802.3bt (Type 3 & 4) complaint USB 2.0 Output: 5V DC, 2A USB C Output: Up to 20V, 5A Battery Type & Capacity: Lithium-Ionnen 7500 mAh 12.6V/94.5 Wh Dimensions 5.5" H x 3.9" W x 1.875" D (140 mm x 100 mm x 48 mm) Operating temperature: 14-140F (-10 to 60 C) Colour: Black Included in delivery: 1x Accelerator Battery Pack Version 2 1x one portable carrying bag 1x one wall charger 1x 2.1 mm plug-plug connection for the 12V output Available downloads: download datasheet

€717.57*
WireXpert 4500 Cable certifier - Cable certification for all standards
One cable certifier for all standards WireXpert also certifies to Cat.6/Cat.6A/Class EA and supports advanced certification for fiber optic installations at 850/1,300nm and 1,310/1,550nm. In addition, a wide range of measurement modules is available for example for coax, M12 D-coded and X-coded. Speed and lightness Shortes measuring times and the intuitive device operation provide fast acceptance measurements. Due to its low weight, the WireXpert 4500 is absolutely recommended for field use. Convince yourself of the performance of the WireXpert 4500!  Certifier up to 2.500 MHz Advanced cable certification for all standards: Class D/E/EA/F/FA, CAT 5/5e/6/6A/7/7A, as well as CAT 8 an Class I & II fast auto test with less than 9 seconds Independent ETL verification to confirm measurement accuracy Meets and exceeds ISO level VI, V, IV, IIIe and TIA level 2G and IIIe accuracy requirements Support from more than 20 cable manufacturers worldwide Field upgradeable with many options such as patch cord testing, Industrial Ethernet, Class FA, coax, fiber optics supports advanced certifications for fiber optics at 850/1,300 nm (multimode) and 1,310/1,550 nm (singlemode) advanced reports and documentation of wiring The only certifier that fulfills the requirements of data centers, office cabling and Industrial Ethernet Available downloads:Download WireXpert 4500 Kabelzertifizierer Data Sheet DE

From €205.17*
%
Oscium WiPry 5x
Transform a smartphone or tablet into a dual band spectrum analyzer (2.4 & 5 GHz). This perfectly portable tool is the ideal solution for field techs and wireless professionals. 2.4 & 5 GHz Spectrum Analyzer Android iOS, PC, Mac Supported Scan & Troubleshoot Wi-Fi SSID’s / RSSI 802.11 & ZigBee Channel Guides Wi-Fi Spectrum Analyzer Oscium’s WiPry 5x visualizes all spectral activity on both 2.4 & 5 GHz. Now it’s possible to identify and avoid interference so wireless connectivity can be optimized. Just download WiPry from either the App Store or Google Play and get started today! Universal Platform Support Oscium’s WiPry 5x is compatible with iOS, Android, PC and Mac. This cross platform solution is perfectly portable as are all Oscium’s tools. And now, it’s possible to use whichever host device you prefer. Oscium's software applications are all free. There's no licensing fee and there's no subscription so it's easy to use your WiPry 5x. Pry Into Wireless Environment The 2.4 GHz band is a busy place today and soon 5 GHz will be congested as well. That's why WiPry 5x supports both bands. Wireless internet operates in this range as does other electronic devices such as baby monitors, cordless phones, garage door openers, and microwave ovens. Since WiFi can extend the length of a football field on 2.4 GHz, devices in nearby buildings or residences can also cause interference. With WiPry 5x, you can pinpoint the source of your noise and get the most out of your wireless internet regardless of the complexity of your environment. Detect & Avoid Noisy Channels WiPry 5x visualizes all wireless activity on both 2.4 & 5 GHz. Measurement settings include 802.11b, 802.11g, 802.11n, 802.11ac and 802.15.4 (ZigBee). SSID-specific activity is also available. Oscium provides a professional Wi-Fi tool that is now available in the Apple App Store and Google Play. Visualize your network like never before: on your favorite smartphone or tablet! Wi-Fi Standards / ZigBee Supported The following Wi-Fi standards are supported: 802.11 b/g/n/ac. The ZigBee protocol (802.11.15.4) is also possible to view through our built-in channel guide, making it the ideal tool to troubleshoot home security and home automation. WiPry 5x also provides visibility on all wireless transmissions such as baby monitors, cordless phones, garage door openers, and microwave ovens. WiPry 5x is perfectly portable and available on Android or iOS. Awesome Features Oscium features include the ability to grade channels (using A through F, just like in school!), calculate signal to noise ratio (perfect for knowing whether VoIP or video streaming is possible), and view the environment over time using waterfall mode. It's also possible to data log your visit and export that data in a csv file for post processing. You can save your favorite setup and load it as needed, saving you time on the job. These are just some of Oscium's awesome capabilities. Spectrum Analyzer Mode: System Requirements (Software): iOS 7.0 or higher, Android 4.0.3 or higher, Win 7, Mac OS 10.10 (Yosemite) or higher System Requirements (Hardware): iOS Lightning Devices (iPad, iPhone, iPod), Android Devices with USB OTG, Windows USB 2.0 or higher Frequency Resolution: 2.4 GHz: 333 KHz / 5 GHz: 1.665 MHz Amplitude Range: -95 to 0 dBm Amplitude Resolution: 0.5 dBm Antenna Port: SMB Connector Antenna: External, 2dBi Gain SSID Scan: Frequency Range: 2.4-2.5 GHz; 5.15 to 5.85 GHz Amplitude Range: -100 to +10 dBm Amplitude Resolution: 1 dBm Antenna: External, 2dBi gain SSID Scan Rate: Adjustable SSID Visualization: Mode (802.11 a/b/g/n/ac) Real Wave, Waterfall Channel Grading Security Type SSID, BSSID Frequency RSSIAvailable downloads: Download Oscium WiPry 5x Datasheet Download Oscium WiPry 5x User Manual

€539.10* €599.00* (10% saved)
Microsemi PoE Tester
The Power over Ethernet (PoE) Tester, connected to an RJ-45 outlet, tests the cabling infrastructure for the presence of power, either IEEE802.3af or IEEE802.3 at standard compliant. The PoE Tester identifies the existence and type of Power Sourcing Equipment (either Endspan or Midspan) in your network. Features Tests RJ-45 outlet for Power over Ethernet existence Works over Cat5 or better cable Detects: IEEE 802.3af midspans and switches Cisco pre-standard in-line switches High Power midspans Power over 2 pairs or 4 pairs Compact design specifically tailored for system integrators and installers Plug and play for ease of use System Description A PoE system comprises a PSE (Power Sourcing Equipment) and a PD (Powered Device). The PSE may either be an Endspan (i.e. a layer 2 Ethernet Switch with integrated PoE) or a Midspan, while the PD is a PoE-enabled terminal, such as IP phone, Wireless LAN access point and Network Security Camera. The PoE tester will check your RJ-45 outlet for power and identify its source, Midspan or Endspan, i.e.IEEE 802.3af, 802.3at or UPoE/EEPoE standard compliant Midspans/Switches. How to use the PoE Tester: Connect a standard category 5 or better cable with RJ-45 connectors to the PoE tester and the RJ-45 outlet (See diagram). Check the LED indicators on the front panel for power and source (PoE switch,Midspan or High Power Midspan). The lit-pattern of LEDs will identify amount of power, and whether it is over 2 or 4 pairs. .. (this should match the colors in the picture of the midspan green LED/OFF LED – 802.3af standard level PoE powering- over spare pairs (PoE source = midspan) green LED/OFF LED – 802.3af standard level PoE powering- over spare pairs (PoE source = midspan) OFF LED/Green LED – 802.3af standard level PoE powering – over data pairs (PoE sourc = Switch) Blue LED / OFF LED – 802.3at standard level PoE powering – over spare pairs (PoE source = Midspan) OFF LED / Blue LED – 802.3at standard level PoE powering – over data pairs (PoE source = Switch) Green LED / Green LED – 802.3af standard level PoE powering, using all 4 pairs Blue LED / Blue LED – 802.3at standard level PoE powering, using all 4 pairs – 60WAvailable downloads: Download Datasheet

€29.90*

Customers also viewed

Microsemi PoE Tester
The Power over Ethernet (PoE) Tester, connected to an RJ-45 outlet, tests the cabling infrastructure for the presence of power, either IEEE802.3af or IEEE802.3 at standard compliant. The PoE Tester identifies the existence and type of Power Sourcing Equipment (either Endspan or Midspan) in your network. Features Tests RJ-45 outlet for Power over Ethernet existence Works over Cat5 or better cable Detects: IEEE 802.3af midspans and switches Cisco pre-standard in-line switches High Power midspans Power over 2 pairs or 4 pairs Compact design specifically tailored for system integrators and installers Plug and play for ease of use System Description A PoE system comprises a PSE (Power Sourcing Equipment) and a PD (Powered Device). The PSE may either be an Endspan (i.e. a layer 2 Ethernet Switch with integrated PoE) or a Midspan, while the PD is a PoE-enabled terminal, such as IP phone, Wireless LAN access point and Network Security Camera. The PoE tester will check your RJ-45 outlet for power and identify its source, Midspan or Endspan, i.e.IEEE 802.3af, 802.3at or UPoE/EEPoE standard compliant Midspans/Switches. How to use the PoE Tester: Connect a standard category 5 or better cable with RJ-45 connectors to the PoE tester and the RJ-45 outlet (See diagram). Check the LED indicators on the front panel for power and source (PoE switch,Midspan or High Power Midspan). The lit-pattern of LEDs will identify amount of power, and whether it is over 2 or 4 pairs. .. (this should match the colors in the picture of the midspan green LED/OFF LED – 802.3af standard level PoE powering- over spare pairs (PoE source = midspan) green LED/OFF LED – 802.3af standard level PoE powering- over spare pairs (PoE source = midspan) OFF LED/Green LED – 802.3af standard level PoE powering – over data pairs (PoE sourc = Switch) Blue LED / OFF LED – 802.3at standard level PoE powering – over spare pairs (PoE source = Midspan) OFF LED / Blue LED – 802.3at standard level PoE powering – over data pairs (PoE source = Switch) Green LED / Green LED – 802.3af standard level PoE powering, using all 4 pairs Blue LED / Blue LED – 802.3at standard level PoE powering, using all 4 pairs – 60WAvailable downloads: Download Datasheet

€29.90*
Tip
The Accelerator Compact PoE + Battery Pack V2
Specifically designed for use at site surveys, it´s small, compact design and battery capacity allow for many hours of continuous use. It is the ultimate site survey tool and a must have for all Wi-Fi engineers! Great for performing wireless site surveys, portable IP camera set up´s, temporary wireless bridge connections, and charging mobile phones and tablets. Multiple PoE outputs Lightweight and portable Charge while in use LCD display toggles between battery percentage and voltage Operating voltage: 110-220V Battery input (2.1mm): 12.6V DC, 2A Battery output (2.1mm): 12V, 2A PoE Output: IEEE 802.af, 802.3at & 802.3bt (Type 3 & 4) complaint USB 2.0 Output: 5V DC, 2A USB C Output: Up to 20V, 5A Battery Type & Capacity: Lithium-Ionnen 7500 mAh 12.6V/94.5 Wh Dimensions 5.5" H x 3.9" W x 1.875" D (140 mm x 100 mm x 48 mm) Operating temperature: 14-140F (-10 to 60 C) Colour: Black Included in delivery: 1x Accelerator Battery Pack Version 2 1x one portable carrying bag 1x one wall charger 1x 2.1 mm plug-plug connection for the 12V output Available downloads: download datasheet

€717.57*
WireXpert 4500 Cable certifier - Cable certification for all standards
One cable certifier for all standards WireXpert also certifies to Cat.6/Cat.6A/Class EA and supports advanced certification for fiber optic installations at 850/1,300nm and 1,310/1,550nm. In addition, a wide range of measurement modules is available for example for coax, M12 D-coded and X-coded. Speed and lightness Shortes measuring times and the intuitive device operation provide fast acceptance measurements. Due to its low weight, the WireXpert 4500 is absolutely recommended for field use. Convince yourself of the performance of the WireXpert 4500!  Certifier up to 2.500 MHz Advanced cable certification for all standards: Class D/E/EA/F/FA, CAT 5/5e/6/6A/7/7A, as well as CAT 8 an Class I & II fast auto test with less than 9 seconds Independent ETL verification to confirm measurement accuracy Meets and exceeds ISO level VI, V, IV, IIIe and TIA level 2G and IIIe accuracy requirements Support from more than 20 cable manufacturers worldwide Field upgradeable with many options such as patch cord testing, Industrial Ethernet, Class FA, coax, fiber optics supports advanced certifications for fiber optics at 850/1,300 nm (multimode) and 1,310/1,550 nm (singlemode) advanced reports and documentation of wiring The only certifier that fulfills the requirements of data centers, office cabling and Industrial Ethernet Available downloads:Download WireXpert 4500 Kabelzertifizierer Data Sheet DE

From €205.17*
%
Oscium WiPry 5x
Transform a smartphone or tablet into a dual band spectrum analyzer (2.4 & 5 GHz). This perfectly portable tool is the ideal solution for field techs and wireless professionals. 2.4 & 5 GHz Spectrum Analyzer Android iOS, PC, Mac Supported Scan & Troubleshoot Wi-Fi SSID’s / RSSI 802.11 & ZigBee Channel Guides Wi-Fi Spectrum Analyzer Oscium’s WiPry 5x visualizes all spectral activity on both 2.4 & 5 GHz. Now it’s possible to identify and avoid interference so wireless connectivity can be optimized. Just download WiPry from either the App Store or Google Play and get started today! Universal Platform Support Oscium’s WiPry 5x is compatible with iOS, Android, PC and Mac. This cross platform solution is perfectly portable as are all Oscium’s tools. And now, it’s possible to use whichever host device you prefer. Oscium's software applications are all free. There's no licensing fee and there's no subscription so it's easy to use your WiPry 5x. Pry Into Wireless Environment The 2.4 GHz band is a busy place today and soon 5 GHz will be congested as well. That's why WiPry 5x supports both bands. Wireless internet operates in this range as does other electronic devices such as baby monitors, cordless phones, garage door openers, and microwave ovens. Since WiFi can extend the length of a football field on 2.4 GHz, devices in nearby buildings or residences can also cause interference. With WiPry 5x, you can pinpoint the source of your noise and get the most out of your wireless internet regardless of the complexity of your environment. Detect & Avoid Noisy Channels WiPry 5x visualizes all wireless activity on both 2.4 & 5 GHz. Measurement settings include 802.11b, 802.11g, 802.11n, 802.11ac and 802.15.4 (ZigBee). SSID-specific activity is also available. Oscium provides a professional Wi-Fi tool that is now available in the Apple App Store and Google Play. Visualize your network like never before: on your favorite smartphone or tablet! Wi-Fi Standards / ZigBee Supported The following Wi-Fi standards are supported: 802.11 b/g/n/ac. The ZigBee protocol (802.11.15.4) is also possible to view through our built-in channel guide, making it the ideal tool to troubleshoot home security and home automation. WiPry 5x also provides visibility on all wireless transmissions such as baby monitors, cordless phones, garage door openers, and microwave ovens. WiPry 5x is perfectly portable and available on Android or iOS. Awesome Features Oscium features include the ability to grade channels (using A through F, just like in school!), calculate signal to noise ratio (perfect for knowing whether VoIP or video streaming is possible), and view the environment over time using waterfall mode. It's also possible to data log your visit and export that data in a csv file for post processing. You can save your favorite setup and load it as needed, saving you time on the job. These are just some of Oscium's awesome capabilities. Spectrum Analyzer Mode: System Requirements (Software): iOS 7.0 or higher, Android 4.0.3 or higher, Win 7, Mac OS 10.10 (Yosemite) or higher System Requirements (Hardware): iOS Lightning Devices (iPad, iPhone, iPod), Android Devices with USB OTG, Windows USB 2.0 or higher Frequency Resolution: 2.4 GHz: 333 KHz / 5 GHz: 1.665 MHz Amplitude Range: -95 to 0 dBm Amplitude Resolution: 0.5 dBm Antenna Port: SMB Connector Antenna: External, 2dBi Gain SSID Scan: Frequency Range: 2.4-2.5 GHz; 5.15 to 5.85 GHz Amplitude Range: -100 to +10 dBm Amplitude Resolution: 1 dBm Antenna: External, 2dBi gain SSID Scan Rate: Adjustable SSID Visualization: Mode (802.11 a/b/g/n/ac) Real Wave, Waterfall Channel Grading Security Type SSID, BSSID Frequency RSSIAvailable downloads: Download Oscium WiPry 5x Datasheet Download Oscium WiPry 5x User Manual

€539.10* €599.00* (10% saved)