Precision splicer CFS-100 - Core-centring splicer
Product number:
CFS-100
Product information "Precision splicer CFS-100 - Core-centring splicer"
For professional splicing of all common fibre types
The core-centring, 3-axis controlled CFS-100 fusion splicer is the perfect companion for splicing work on small and large projects. The lightweight and flexible precision splicer enables the splicing of G.651 fibres with an attenuation of less than 0.01 dB and G.652 fibres with an attenuation of less than 0.02 db (typical). Equipped with removable universal fibre holders, SOC holder and internal thermometer and barometer, the CFS-100 can be used anywhere. A fast five-second start time and an average splicing time of nine seconds, as well as the automatic heating oven for shrink splice protection sleeves, speed up the work process and result in more splices per time.
Intelligent systems support the user at work
The CFS-100 supports the user in troubleshooting and quality assessment by recording the cleave break angle, the core-axis offset, the cleanliness of the fibre and the splice attenuation. Customised limit values can be defined and stored in profiles. Before each splicing process, the spliceability of the fibres is analysed and the fibres are cleaned using a cleaning arc. If the prospect of a satisfactory splice result is not good enough, the device cancels the process to save time-consuming reworking. Re-ARC makes it possible to improve the splicing result at a later stage.
If desired, splicing and shrinking can be defined in detail in various profiles. If this is not desired, the fibre type can also be recorded fully automatically and the device determines the required parameters itself.
Designed for the toughest operating conditions
The robust housing is equipped with rubber bumpers and a windscreen and the splice area has LED lighting for working in the most adverse environments. The bright, 5" LCD touch display has two operating modes, allowing you to work in two positions from the front and rear of the device. The replaceable battery with a capacity of 4400 mAh and the electrodes can be changed in seconds.
Technical data:
- Centring method: Core centring (3-axis controlled)
- Number of simultaneous spliceable fibres: 1
- Suitable fibres: Singlemode fibres and multimode fibres
- Fibre optic types and attenuations:
- TU-T G.651 (MM) <0.01 dB (typical)
- ITU-T G.652 (SM) <0.02. dB (typical)
- ITU-T G.653 (SM DSF) <0.04 dB (typical)
- ITU-T G.655 (SM NZ-DSF) <0.04 dB (typical)
- ITU-T G.657 (SM BIF) <0.02 dB (typical)
- EDF <0.04 dB (typical)
- Supported ø cladding: ~ 80 to 150 µm
- Supporter ø Coating: ~ 100 to 1000 µm
- Free fibre length: 8 - 16 mm
- Splice time: ø < 9 s (depending on mode and fibre orientation)
- Pull strength: approx. 2.0 N
- Splicing processes per electrode: > 5000 splicing processes
- Splice modes: automatic and manual control
- Heating time shrink oven: < 25 s, adjustable
- Length of shrink splice protection sleeve: < 60 mm
- Boot time: < 5 s.
- Number of possible splice profiles: 240
- Number of possible heating profiles: 30
- Splice result: splice display and attenuation assessment
- Memory size: 5000 splice results (CSV), 100 screenshots
- Data transmission: Micro USB cable
- Supported languages: EN, DE, FR, ES, IT, PT, RU, PL, RO, FI, ZH
- Display: 5.0" colour touch LCD
- Electrode lighting: LED
- Power supply for external lamp: 10 - 12V DC
- Battery life: > 200 splicing and shrinking processes
- Battery: Li-Ion 10.8 V DC, 48 Wh, 4400 mAh, replaceable
- AC adapter:
- Input: AC 100 - 240 V, 50/60 Hz, Max. 1,5 A
- Output: 15 V DC, 4.3 A
- Charging time (to 100%): < 4 hours
- Operating temperature: -20°C to +55°C
- Storage temperature: -40°C to +70°C
- Humidity: < 95% (non-condensing)
- Possible operating altitude: Up to 5000 m above sea level
- Wind speed: up to 15 m/s
- Dimensions: 147 x 138 x 135 mm (L x W x H)
- Weight: 1.85 kg (incl. battery)
- Tripod thread: 1/4"
- Manual (DE,EN): enclosed
Included in delivery:
- 1x CFS-100 splicer
- Pair of electrodes (pre-installed)
- Pair of universal fibre holders (4 in 1)
- SOC fibre holder
- SOC shrink oven adapter
- Li-Ion battery
- Fibre Cleaver OFC-30
- Cooling tray for shrink oven
- Power adapter incl. power cable
- Micro-USB cable (for data transfer)
- Hard case
- Carrying strap hard case
- Quick guide
- Manual
- Certificate of calibration
- Installation tool