VIAVI Network & Service Companion (NSC-200)
Product number:
NSC-200-LOOPBACK-PLUS
Product information "VIAVI Network & Service Companion (NSC-200)"
The Network & Service Companion (NSC-200) enables all technicians and service providers to test the network and service layer up to 10 Gbit/s before transmitting the test results to customers and service providers.
- Simplify the testing and analysis processes for beginners and experts. Press the start button and all results are displayed in less than 1 minute.
- Avoidance of customer complaints and localisation of the actual cause of the fault through tests at each access point (GPON, XGSPON, Ethernet, WLAN) for clear and fast delimitation with assessment from the customer's perspective
- Optimisation of WLAN network coverage and performance as well as information for end users through simple analysis of individual rooms. Issue recommendations to improve network performance.
Advantages:
- Simply test everything everywhere: PON, Ethernet, WLAN up to 10 Gbit/s
- Verification of the actual customer experience and/or the physical network layer on all PON, Ethernet and WLAN test interfaces
- Checking the provision of PON services prior to fault diagnosis at the customer's premises
- Direct transmission of test reports by e-mail
- Compliance with test procedures by internal and external technicians with centralised, cloud-based workflow and results management
Performance features:
- GPON, XGSPON, Ethernet and WLAN tests, including throughput measurements up to 10 Gbit/s
- Interfaces for Ethernet 1G, 2.5G, 5G and 10G
- WiFi 3x3-Tests and WiFi Expert up to WiFi 6 (802.11 a/b/g/n/ac/ax)
- PON data analysis (PON-ID)
- PON power level
- Job manager
- Support for the Mobile Tech App and StrataSync
Technical data:
GPON (optional)
- ONU/ONT: VIVA GPON SFP
- Interface: SC/APC
- Standard:
- According to G.984.2 (GPON)
- According to G.988 (OMCI)
- Power range of the Tx upstream signal (1310 nm): 0.5 dBm to 5.0 dBm
- Power range of the Rx downstream signal (1490 nm): -28.0 dBm to -8.0 dBm
- Test results: PON activation status, power level of SFP, PON ID, ODN class, ONT ID (according to ITU-T G.984 and G.988)
XGSPON (optional)
- ONU/ONT: VIAVI XGSPON SFP
- Interface: SC/APC
- Standard:
- According to G.98071 XGSPON
- According to G.988 (OMCI)
- Power range of the Tx upstream signal (1270 nm): 4.0 dBm to 9.0 dBm
- Power range of the Rx downstream signal (1577 nm): -28.0 dBm to -9.0 dBm
- Test results: PON activation status, power level of SFP, PON ID, ODN class according to ITUT-T G.9807 and G.988
Ethernet (optional)
- Standard: IEEE 802.3 (10M, 100M, 1G, 2.5G, 5G, 10G Ethernet)
- Test results: Ethernet frames, IP connection, ping, trace route, web connection, data rate test up to 10 G/bits
- TWAMP reflector (optional): 10M, 100M, 1G Ethernet. Support for TWAMP light reflectors
- Port/L2/L3 loopback (optional): 10M, 100M, 1G, 10G Ethernet. Support for port loopback and source-specific VIAVI loopback
WiFi (optional)
- Test results
- WiFi Expert (Passive Mode): Up to WiFi 6 (802.11 a/b/g/n/ac/ax) Signal strength (RSSI), channel, standard, width, channel noise, total airtime, noise airtime, estimated throughput, recommendation.
- OneCheck WiFi (Connected Mode): up to WiFi 3x3 (802.11 a/b/g/n/ac) Signal strength (RSSI), standard, width, max PHY rate of the router, IP/web connectivity, throughput measurements
Throughput/performance measurement (optional)
- TCP throughput measurement: VIAVI SpeedCheck, Ookla Speedtest, VIAVI TrueSpeed (RFC-6349), iPerf
- Performance: 10 Gbit/s for SpeedCheck, Ookla Speedtest, TrueSpeed, iPerf
- Test results: Runtime, bit rates in upstream and downstream
User interface
- Communication interface: Bluetooth v5.0
- Support for smart devices (recommendation): Mobile Tech App, from Android 8, from iOS 12
- Support of VIAVI measuring devices: ONX-580, ONX-CATV
General parameters:
- Dimensions: 116 x 190 x 52 mm
- Weight: 0,8 kg
- Operating temperature:
- without battery charging mode: -10 °C to 50 °C
- with battery charging mode: 0 °C to 40 °C - Storage temperature: -20°C to 60 °C
- Rel. humidity (operation): 10% to 90%, non-condensing
- Operating altitude: max. 4000 m
- DC input: 15 V at 3 A, USB-C Power Delivery (PD)
- Battery: Lithium-ion battery, 32 W/h, replaceable on site
- Battery life: 1 week with typ. Use for installations
- Charging port: USB-C
- USB host port: USB-A (USB 3.0)