Skip to main content Skip to search Skip to main navigation

Zackenkönig

Product information "Zackenkönig"

The Zackenkönig is the perfect tool to drill easy and cleanly a hole for a cable entry by hand. Small, light and electricity needed. A MUST HAVE for every WLAN Pro.

Skip product gallery

Customers also viewed

Aluminium tripod, black anodised pushed out length 10,50 Meter
This aluminium high tripod is manufactured by a family owned factory in Germany. With an extended length of 10.50 meter and a load capacity of up to 8 kilos, the aluminium high tripod is perfect for WiFi Site Surveys in logistic warehouses, various types of factories and distribution centres. Due ot the inserted length of 1.90 meter and a transport weight of approx. 28 kilos, this aluminium high tripod is very easy to transport.  The aluminium high stand consists of an aluminium round mast to which four feet are attached. The individual feet are telescopic so that small unevennesses in the terrain can be compensated. The round masts consist of several aluminium tubes that are inserted into each other and polished on one side and pushed out by hand. The sturdy clamps securely lock the extended tubes in place.    The maximum permissble extension lenght is limited by a marking ring. There is no fixed stop when pulling out. There are two markings for safety. When the first mark is reached, the telescopic tube should then be slowly pushed out to the second mark and locked in place by the clamp when this is reached.  The aluminium high tripod and the round mast are made of anodised aluminium round tubes (AlMgSi05 F22) with a 2 mm wall thickness. The own weight is approx. 28 kilos and is therefore very low.  ** Note: When using the aluminium high tripod with a head load, bracing must be carried out depending on the existing wind conditions.**   Aluminium high tripod, black anodised 10.50 metres extended height Inserted length: 1.90 metres Extended length: 10.50 metres Colour: black anodised Tube diameter (mm): 70/65/60/55/50/45/40 Material: Aluminium Load capacity: up to 8 Kilo Transport weight: approx. 28 Kilo  Head: 1/4" photo thread (removable) Country of origin: Germany

€1,957.55*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Tip
The Accelerator Compact PoE + Battery Pack V2
Specifically designed for use at site surveys, it´s small, compact design and battery capacity allow for many hours of continuous use. It is the ultimate site survey tool and a must have for all Wi-Fi engineers! Great for performing wireless site surveys, portable IP camera set up´s, temporary wireless bridge connections, and charging mobile phones and tablets. Multiple PoE outputs Lightweight and portable Charge while in use LCD display toggles between battery percentage and voltage Operating voltage: 110-220V Battery input (2.1mm): 12.6V DC, 2A Battery output (2.1mm): 12V, 2A PoE Output: IEEE 802.af, 802.3at & 802.3bt (Type 3 & 4) complaint USB 2.0 Output: 5V DC, 2A USB C Output: Up to 20V, 5A Battery Type & Capacity: Lithium-Ionnen 7500 mAh 12.6V/94.5 Wh Dimensions 5.5" H x 3.9" W x 1.875" D (140 mm x 100 mm x 48 mm) Operating temperature: 14-140F (-10 to 60 C) Colour: Black Included in delivery: 1x Accelerator Battery Pack Version 2 1x one portable carrying bag 1x one wall charger 1x 2.1 mm plug-plug connection for the 12V output Available downloads: download datasheet

€563.13*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.