This aluminium high tripod is manufactured by a family owned factory in Germany. With an extended length of 10.50 meter and a load capacity of up to 8 kilos, the aluminium high tripod is perfect for WiFi Site Surveys in logistic warehouses, various types of factories and distribution centres. Due ot the inserted length of 1.90 meter and a transport weight of approx. 28 kilos, this aluminium high tripod is very easy to transport.  The aluminium high stand consists of an aluminium round mast to which four feet are attached. The individual feet are telescopic so that small unevennesses in the terrain can be compensated. The round masts consist of several aluminium tubes that are inserted into each other and polished on one side and pushed out by hand. The sturdy clamps securely lock the extended tubes in place.    The maximum permissble extension lenght is limited by a marking ring. There is no fixed stop when pulling out. There are two markings for safety. When the first mark is reached, the telescopic tube should then be slowly pushed out to the second mark and locked in place by the clamp when this is reached.  The aluminium high tripod and the round mast are made of anodised aluminium round tubes (AlMgSi05 F22) with a 2 mm wall thickness. The own weight is approx. 28 kilos and is therefore very low.  ** Note: When using the aluminium high tripod with a head load, bracing must be carried out depending on the existing wind conditions.**   Aluminium high tripod, black anodised 10.50 metres extended height Inserted length: 1.90 metres Extended length: 10.50 metres Colour: black anodised Tube diameter (mm): 70/65/60/55/50/45/40 Material: Aluminium Load capacity: up to 8 Kilo Transport weight: approx. 28 Kilo  Head: 1/4" photo thread (removable) Country of origin: Germany

Bag for tripod with shoulder strap 80 cm length Inside length: approx. 80 cm Inside width: 6-7 x -6-7 cm Colour: Black belt lenght: up to 85 cm

Counterweight - sandbag for tripods Dimensions: 23 x 50 cm Maximum total weight of sand: 8 Kilo (4 Kilo per bag) Sand is not included !

A spring-loaded tripod with a 16 mm head and a 1/4 thread.Suitable for the Wifighter mount to test access point positions and thus perform WLAN site surveys (APoS measurement). The secure, rigid design is both lightweight and mobile, making it ideal for site surveys. The extendable folding mechanism minimizes the tripod´s dimensions when folded and enables quick setup and takedown. Height adjustment is stepless thanks to the profile locks and the latch. The non-slip feet stabilize the tripod precisely. The tripod is additionally equipped with a spring. This significantly reduces the risk of damage when lowering an access point mounted on the tripod, compared to an air-damped tripod, on which the damping diminishes over time. Robust and durable materials - aluminum tripod Height adjustable from approx. 110-308 cm 16 mm double-sided studio head - 1/4 thread Spring-loaded Telescopic folding mechanism Clamps that lock the sections Non-slip feet Weight: 1.9 kg Load capacity: up to 6 kg Downloads datasheet (EN)