Cisco to Aruba Adapter "Arubadaptor-V1"

Made in Hamburg/Germany The combined mount for Aruba Access Points and patch antennas enables space-saving installation of Aruba Access Points with external patch antennas on walls or ceilings. The antenna is attached to the front section and – together with the front – can be tilted approx. ±15° to ±30° up or down depending on the access point in use. This saves both space and installation time, as only one mount is required for both AP and antenna. Material and color match our other indoor mounts: 1 mm zinc-plated steel, powder-coated, standard color white (RAL 9010); additional colors available upon request. The Aruba Access Point is connected to the mount using the included Arubadaptor. Cable management remains unobstructed: all edges are deburred to protect cables. For wall or ceiling installation, up to six screw points are available; typically, three screws provide sufficient support. Details Compatibility – Supported Aruba AP series: 500, 600, 700. – Supported patch antennas: AP-ANT-25A, AP-ANT-28, AP-ANT-35A, AP-ANT-38, AP-ANT-45, AP-ANT-48 as well as newer antennas with identical mounting hole dimensions. – AP attachment is done using the Arubadaptor (included). Mechanics & Dimensions – Dimensions of the mount: W 290 mm × H 280 mm × D 121 mm. – Note: Height and depth vary depending on the tilt angle and AP model. – Tilt range (front/antenna): depending on AP, approx. ±15° to ±30°. – Mounting points: wall/ceiling with up to 6 screws; typically 3 screws are sufficient. – Cable management: unobstructed; deburred edges protect cables. Material & Finish – 1 mm zinc-plated steel, powder-coated. – Standard color white (RAL 9010); other colors available on request. These material and color specifications match our other mounts for a consistent visual appearance. Installation & Use – Installation on walls or ceilings; the front section with antenna is tiltable (see tilt range). – Designed for indoor use. Important Notes – Before installation, verify the AP series and mounting hole dimensions of the patch antenna. – Use the Arubadaptor to connect the AP to the mount. Advantages at a Glance Combined installation of Aruba AP and patch antenna – saves space and installation time Tiltable front with antenna: depending on AP approx. ±15° to ±30° Clean cable management thanks to deburred edges Stable wall/ceiling installation (up to 6 screws; typically 3 are sufficient) 1 mm zinc-plated steel, powder-coated; standard color RAL 9010, other colors on request Technical Overview Feature Description Note Ensure antenna compatibility via mounting hole dimensions; AP installation requires the included Arubadaptor. Product Combined mount for Aruba Access Points and patch antennas (CM-APANT-A-3) Compatible AP series Aruba 500, 600, 700 series Compatible antennas AP-ANT-25A, AP-ANT-28, AP-ANT-35A, AP-ANT-38, AP-ANT-45, AP-ANT-48 and newer models with identical mounting hole dimensions Dimensions (mount) W 290 mm × H 280 mm × D 121 mm (H/D depend on tilt angle & AP) Tilt range (front) Depending on AP approx. ±15° to ±30° Material / finish 1 mm zinc-plated steel, powder-coated; standard color white (RAL 9010), other colors on request Installation Wall/ceiling; up to 6 screws, typically 3 screws sufficient Cable management Unobstructed; deburred edges protect cables AP attachment Using the included Arubadaptor Use case Indoor use (according to AP/antenna approvals) Scope of delivery Front & rear mounts (CM-APANT-A-3), 2× M6 screws, 2× wing screws, 4× M4 screws for antenna, Arubadaptor Conclusion The combined mount for Aruba consolidates AP and patch antenna installation into a single solution, saving space and time while offering flexible alignment thanks to the tiltable front. With clearly defined compatibility, the included Arubadaptor and a robust RAL 9010 finish, it provides a precise, practical indoor mounting solution. Scope of Delivery – Front mount (CM-APANT-A-3) – Rear mount (CM-APANT-A-3) – 2× M6 screw – 2× wing screw for fixing – 4× M4 screw for antenna installation – Arubadaptor Downloads Datenblatt (DE)   datasheet (EN)

Made in Hamburg/Germany The Industrial Ceiling Mount Version 2 for Aruba Access Points enables fast, low-tool and drill-free installation of Aruba Access Points on industrial & grid ceilings, cable trays, ducts, ladders as well as suspended wire-mesh ceilings. The mount is simply hooked into place and secured with wing screws—the access point is then hooked into the mount and operated horizontally. This reduces installation effort and time in industrial environments. Details Compatibility – Supported Aruba AP series: 500 series, 600 series, 700 series – Mounting targets: industrial & grid ceilings, cable trays, ducts, ladder systems, suspended mesh ceilings and similar structures Mechanics & Dimensions – Mounting principle: hook in the mount, then tighten using wing screws. – Installation orientation: horizontal (AP is hooked into the mount). – Drilling: not required. Material & Finish – 1 mm zinc-plated steel, powder-coated; standard color white (RAL 9010). – Other colors available on request after consultation. These material and color specifications match our other indoor mounts and ensure a uniform appearance. Installation & Use – Fast installation by hooking in and securing with wing screws—ideal for retrofit and industrial environments. – Application: indoor use – No drilling required—resulting in minimal impact on existing ceiling/tray systems. Advantages at a Glance Drill-free installation – hook in & secure with wing screws reduces effort and installation time Industrial-grade – suitable for grid ceilings, cable trays/ducts/ladders and mesh ceilings Clean horizontal installation – AP is hooked into the mount Durable surface – powder coating is scratch- and impact-resistant; standard color RAL 9010 Wide Aruba compatibility – supports multiple AP series Technical Overview Feature Description Product Industrial Ceiling Mount Version 2 for Aruba Access Points (CM-IND-A-2) Category / Purpose Mount for fast, drill-free horizontal installation on industrial/grid ceilings, cable trays, ducts, ladder systems, suspended mesh ceilings Compatibility 500 series, 600 series, 700 series Mounting principle Hook in the mount, secure using wing screws; AP is hooked in Material / finish Fully powder-coated, scratch- and impact-resistant; standard: white (RAL 9010); other colors on request Installation Drill-free; suitable for industrial/grid ceilings, cable trays and mesh ceilings Scope of delivery 1× mount (CM-IND-A-2), 2× M5 wing screw; APs not included Use case Indoor Conclusion The Industrial Ceiling Mount Version 2 is the fast, drill-free solution for horizontal installation of Aruba Access Points on common industrial structures. The hook-in mounting principle and wing-screw fixation make installation quick and secure; the robust RAL 9010 powder coating ensures long-lasting durability. Its broad compatibility with popular Aruba AP series makes the mount highly versatile for project work. Scope of Delivery – 1× mount (CM-IND-A-2) – 2× M5 wing screw – Access Points shown are not included.