Bag for tripod with shoulder strap 80 cm length Inside length: approx. 80 cm Inside width: 6-7 x -6-7 cm Colour: Black belt lenght: up to 85 cm

Counterweight - sandbag for tripods Dimensions: 23 x 50 cm Maximum total weight of sand: 8 Kilo (4 Kilo per bag) Sand is not included !

The fibre optic cleaning case is the perfect companion for anyone who installs, splices, measures or maintains fibre optic cables.Dirty fibre optic connectors are the most common cause of transmission problems in fibre optic systems in FTTX and campus areas, in building cabling or in wide area networks.The cleaning case contains everything you need to clean your fibre optic system quickly and at a low cost per cleaning. Both dry and wet cleaning components guarantee that all types of dirt are reliably removed.One for many applicationsUniversally applicable for standard plugs, sockets and fibre optic cables. Combination of wet and dry cleaning.Quick cleaningGentle cleaning of liquids and solids on fibre optic fibres. Ideal for the initial equipment of the fibre optic installer.Everything has its place hereThe case is equipped with a foam insert customised to the individual parts. All components can be reordered!Included in delivery:1 piece for SC/FC/ST/E2000 fibre optic connectors: NTT NEOCLEAN-F251 piece for LC/MU fibre optic connectors: NTT NEOCLEAN-F121x Chemtronics QBE-2 cleaning platform50 pieces in a dispenser: Chemtronics FSA50 wet cleaning wipes for fusion splices1x NetPeppers LWL-Cleaner 100 ml1x transport case with foam insert

Legrand Montageplatte, Vollplatte, Abmessung 400 x 300 (Höhe x Breite in mm); Material: StahlblechMontageplatteAbmessungen: 400 x 300 mm (Höhe x Breite in mm)Werkstoff: StahlOberfläche: verzinktGewicht: ca. 1,1 Kg

Legrand Wandschrank Marina mit Sichtfenster aus Sicherheitsglas, Schutzart IP66  - IK10, Klasse II, nach IEC/EN 60529, IEC/EN 62262, Außenabmessungen 400 x 300 x 206 (Höhe x Breite x Tiefe in mm). Material: glasfaserverstärktes Polyester, Lichtgrau RAL 7035, selbstverlöschend 960 °C, besonders für korrosive Umgebungen geeignet, Tür beidseitig anschlagbar, inkl. Doppelbarverschluss mit Doppelbartschlüssel. Montageart: AufputzArt der Abdeckung: TürAusführung Deckel: geschlossenArt der Tür: EinzelnSichtfenster: JaMit Schloss: JaMasse: 400 x 300 x 206 mm (Höhe x Breite x Tiefe)Einbautiefe: 205 mmInnentiefe: 178 mmMaterialstärke Gehäuse: 2,5 mmMaterialstärke Tür: 2,8 mmFarbe: Grau RAL 7035Anzahl der Öffnungen für Flanschplatten: 0Anbaumöglichkeit: NeinWerkstoff des Gehäuses: KunststoffOberfläche: unbehandeltMit Montageplatte: NeinGeeignet für Außengebrauch: JaGeeignet für Blitzschutz: JaSchutzart (IP): IP66 Schutzklasse: IISchlagfestigkeit: IK10Funktionsinhalt: ohne

For professional splicing of all common fibre typesThe core-centring, 3-axis controlled CFS-100 fusion splicer is the perfect companion for splicing work on small and large projects. The lightweight and flexible precision splicer enables the splicing of G.651 fibres with an attenuation of less than 0.01 dB and G.652 fibres with an attenuation of less than 0.02 db (typical). Equipped with removable universal fibre holders, SOC holder and internal thermometer and barometer, the CFS-100 can be used anywhere. A fast five-second start time and an average splicing time of nine seconds, as well as the automatic heating oven for shrink splice protection sleeves, speed up the work process and result in more splices per time. Intelligent systems support the user at workThe CFS-100 supports the user in troubleshooting and quality assessment by recording the cleave break angle, the core-axis offset, the cleanliness of the fibre and the splice attenuation. Customised limit values can be defined and stored in profiles. Before each splicing process, the spliceability of the fibres is analysed and the fibres are cleaned using a cleaning arc. If the prospect of a satisfactory splice result is not good enough, the device cancels the process to save time-consuming reworking. Re-ARC makes it possible to improve the splicing result at a later stage. If desired, splicing and shrinking can be defined in detail in various profiles. If this is not desired, the fibre type can also be recorded fully automatically and the device determines the required parameters itself.Designed for the toughest operating conditionsThe robust housing is equipped with rubber bumpers and a windscreen and the splice area has LED lighting for working in the most adverse environments. The bright, 5" LCD touch display has two operating modes, allowing you to work in two positions from the front and rear of the device. The replaceable battery with a capacity of 4400 mAh and the electrodes can be changed in seconds.Technical data:Centring method: Core centring (3-axis controlled)Number of simultaneous spliceable fibres: 1Suitable fibres: Singlemode fibres and multimode fibresFibre optic types and attenuations:TU-T G.651 (MM) <0.01 dB (typical)ITU-T G.652 (SM) <0.02. dB (typical)ITU-T G.653 (SM DSF) <0.04 dB (typical)ITU-T G.655 (SM NZ-DSF) <0.04 dB (typical)ITU-T G.657 (SM BIF) <0.02 dB (typical)EDF <0.04 dB (typical) Supported ø cladding: ~ 80 to 150 µmSupporter ø Coating: ~ 100 to 1000 µmFree fibre length: 8 - 16 mmSplice time: ø < 9 s (depending on mode and fibre orientation)Pull strength: approx. 2.0 NSplicing processes per electrode: > 5000 splicing processesSplice modes: automatic and manual controlHeating time shrink oven: < 25 s, adjustableLength of shrink splice protection sleeve: < 60 mmBoot time: < 5 s.Number of possible splice profiles: 240Number of possible heating profiles: 30Splice result: splice display and attenuation assessmentMemory size: 5000 splice results (CSV), 100 screenshotsData transmission: Micro USB cableSupported languages: EN, DE, FR, ES, IT, PT, RU, PL, RO, FI, ZHDisplay: 5.0" colour touch LCDElectrode lighting: LEDPower supply for external lamp: 10 - 12V DCBattery life: > 200 splicing and shrinking processesBattery: Li-Ion 10.8 V DC, 48 Wh, 4400 mAh, replaceableAC adapter: Input: AC 100 - 240 V, 50/60 Hz, Max. 1,5 AOutput: 15 V DC, 4.3 ACharging time (to 100%): < 4 hoursOperating temperature: -20°C to +55°CStorage temperature: -40°C to +70°CHumidity: < 95% (non-condensing)Possible operating altitude: Up to 5000 m above sea levelWind speed: up to 15 m/sDimensions: 147 x 138 x 135 mm (L x W x H)Weight: 1.85 kg (incl. battery)Tripod thread: 1/4"Manual (DE,EN): enclosedIncluded in delivery:1x CFS-100 splicerPair of electrodes (pre-installed)Pair of universal fibre holders (4 in 1)SOC fibre holderSOC shrink oven adapterLi-Ion batteryFibre Cleaver OFC-30Cooling tray for shrink ovenPower adapter incl. power cableMicro-USB cable (for data transfer)Hard caseCarrying strap hard caseQuick guideManualCertificate of calibrationInstallation tool

The Zackenkönig is the perfect tool to drill easy and cleanly a hole for a cable entry by hand. Small, light and electricity needed. A MUST HAVE for every WLAN Pro.